SWING MOTOR 0955870 - Caterpillar

Illustration 1 g01061080
The operator must observe the outputs in order to determine if the modules are operating properly. This self testing feature is three seconds long.During the self test, all alert indicators flash.The digital display window shows the following readouts:
All indicators of units (Deg C, kPa, miles, kilometers, rpm, and liters)
"X10"
Symbol for the hour meter
"8.8.8.X8.8" readoutThe pointers in the tachometer and in the gauges point upward. The pointers will then point to the left. The pointers will then point to the right. The pointers will then point to the final position.
The readout of the gear shows "**".
The speed readout shows "188", "MPH", and "km/h".
The action light stays illuminated.
The action alarm sounds once.The monitoring panel is then in the normal operating mode. If a switch is grounded, the monitoring system will display the modes.Make any necessary repairs before you operate the machine.