SWITCH - ON/OFF ILLUMINATED 0815809 - Caterpillar

Illustration 6 g02724417
Disconnect hose assemblies (13) and hose assemblies (14).
Illustration 7 g02724418
Disconnect hose assemblies (15).
Illustration 8 g02724422
Illustration 9 g02724423
Top of Cab
Use Tooling (C) and a suitable lifting device to raise tilt cylinder (16). The weight of tilt cylinder (16) is approximately 204 kg (450 lb).
Illustration 10 g02724466
Illustration 11 g02724550
Illustration 12 g02724552
Install suitable cribbing under lift cylinder (17). Remove bolt (18). Repeat this step for the opposite side.
Use Tooling (D) and a suitable lifting device to remove pin assembly (19). Repeat this step for the opposite side.
Illustration 13 g02724555
Attach a suitable lifting device onto lift arm assembly (20). The weight of lift arm assembly (20) is approximately 1406 kg (3100 lb).
Illustration 14 g02724562
Illustration 15 g02724568
Remove bolt (21). Use Tooling (E) and a suitable lifting device to remove pin assembly (22). Repeat this step for the opposite side.
Illustration 16 g02724555
Remove lift arm assembly (20).
Illustration 17 g02724764
Remove lip seals (23), lip seals (24), lip seals (25), and lip seals (26). Repeat this step for the remaining lip seals.
Illustration 18 g02724592
Use Tooling (F) to remove bearing (27).
Illustration 19 g02724596
Use Tooling (G) to remove bearings (28).
Illustration 20 g02724598
Use Tooling (H) to remove bearings (29).
Illustration 21 g02724599
Use Tooling (J) to remove bearings (30).
Repeat Step 17 through Step 19 for the opposite side.