SWITCH AS-ROCKER 1429320 - Caterpillar

General Safety Instructions (2)
This message is on the inside right window of the cab.
Illustration 4 g06175445General safety instructions for earth moving machines used to lift loads. These instructions define the operating conditions of the machine when used to lift loads.Monitor Initialization (3)
This message is on the inside right window of the cab.
Illustration 5 g06175656When the machine is started, the operator shall imperatively wait for the screen to be fully initialized before maneuvering and using the controls, pedals, or joysticks.Occupancy Limitation (4)
This message is on the inside right window of the cab.
Illustration 6 g06175659Indication of the maximum authorized number of people on the machine in travel or in operating mode.Camera Notice (5)
This message is on the inside right window of the cab.
Illustration 7 g06175661The use of cameras to travel on road or on rail is prohibited. The cameras are to be used in work mode, to detect hazards present around the machine during maneuvers.Auxiliary Lifting Point (6)
This message is located under the stick, above the auxiliary lifting point.
Illustration 8 g06175678Prevention of the maximum working load (CMU) authorized on the auxiliary lifting point.Rotation Hazard (7)
This message is at four locations around the upper chassis.
Illustration 9 g06175682Hazard prevention for persons present in the work area of the machine, and especially in the upper frame rotation and travel areas, both on road and on rail.Emergency Stop Button (8)
Indication of the emergency stop button location. Message is located around the button, on the right console of the operator cab. Also on the control desk inside the second cab.
Illustration 10 g06175686Brake System Release (9)
This message is on the rear of the chassis.
Illustration 11 g06175697Indication of the location of the manual pump, enabling, in backup mode, to release the brakes on the railway axles to allow towing of the machine on railway tracks.Emergency Mode Security Seal (10)
This message is inside cab on the left lock-fitted box for "Smart Control System".
Illustration 12 g06175706Message relates to the use of the key to deactivate the parameters of the Smart Control System. To access the key, the seal must be removed. In this case, the seal reveals the word "VOID / OPEN". This seal enables the safety technician to check if the emergency mode has been used.Emergency Mode Operation (11)
This message is inside cab on the left lock-fitted box for "Smart Control System".
Illustration 13 g06175717In backup mode, indication of how to use of the key that fully deactivates the limitations defined by the Smart Control System configuration.Brake Release Bar Location (12)
This message is inside the cab, behind the second seat.
Illustration 14 g06175728Indication of the location of the brake release bar that commands the railway axle brake release when the machine is towed on railway tracks.