1525710 SWITCH AS-PUSH BUTTON Caterpillar parts
950G, 950G II, 962G, 962G II, 966G, 966G II, 972G, 972G II, 980G, 980G II
Rating:
Alternative (cross code) number:
CA1525710
152-5710
1525710
CA1525710
152-5710
1525710
Weight: 0.04 pounds 0 kg.
WHEEL LOADER,
Compatible equipment models: 1525710:
Number on catalog scheme:
15
For full view, you need register
Information:
Assembly Procedure
Note: Cleanliness is an important factor. Before assembly, thoroughly clean all parts in cleaning fluid. Allow the parts to air dry. Do not use wiping cloths or rags to dry parts. Lint may be deposited on the parts which may cause trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement. Dirt and other contaminants can damage the precision component. Perform assembly procedures on a clean work surface. Keep components covered and protected at all times.Note: Lubricate the internal components with the lubricant that is being sealed.
Illustration 1 g01094904
Install the O-ring seal to plug (41). Install plug (41).
Illustration 2 g01094903
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install O-ring seal (40) to plug (39). Install plug (39). Note: Install set screw (35) to the distance recorded in the disassembly procedure.
Install ball (38), plunger (37), spring (36) and set screw (35).
Install O-ring seal (34) to plug (33). Install plug (33).
Illustration 3 g01094902
Illustration 4 g01094900
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install two O-ring seals (20) to spool (21).
Install spool (21), piston (22), ball (23), plunger (24) and spring (25).
Install O-ring seal (26) to plug (19). Install plug (19).
Install O-ring seal (27) to spool (28).
Install spool (28), spring seat (29), spring (30) and spring (31).
Install O-ring seal (32) to plug (18). Install plug (18).
Illustration 5 g01094899
Illustration 6 g01094896
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install two spacers (4), washer (5), O-ring seal (6), plunger (7), poppet (8) and spring (9). Note: Install screw (3) to the distance recorded in the disassembly procedure.
Install O-ring seal (10) to screw (3). Install screw (3) and nut (2).
Install two O-ring seals (13) to spool (14).
Install spring (11), poppet (12), spool (14), poppet (15) and spring (16).
Install O-ring seal (17) to plug (1). Install plug (1). End By:
Install the brake accumulator charging valve. Refer to Disassembly and Assembly, "Accumulator Charging Valve (Brake) - Install".
Note: Cleanliness is an important factor. Before assembly, thoroughly clean all parts in cleaning fluid. Allow the parts to air dry. Do not use wiping cloths or rags to dry parts. Lint may be deposited on the parts which may cause trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement. Dirt and other contaminants can damage the precision component. Perform assembly procedures on a clean work surface. Keep components covered and protected at all times.Note: Lubricate the internal components with the lubricant that is being sealed.
Illustration 1 g01094904
Install the O-ring seal to plug (41). Install plug (41).
Illustration 2 g01094903
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install O-ring seal (40) to plug (39). Install plug (39). Note: Install set screw (35) to the distance recorded in the disassembly procedure.
Install ball (38), plunger (37), spring (36) and set screw (35).
Install O-ring seal (34) to plug (33). Install plug (33).
Illustration 3 g01094902
Illustration 4 g01094900
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install two O-ring seals (20) to spool (21).
Install spool (21), piston (22), ball (23), plunger (24) and spring (25).
Install O-ring seal (26) to plug (19). Install plug (19).
Install O-ring seal (27) to spool (28).
Install spool (28), spring seat (29), spring (30) and spring (31).
Install O-ring seal (32) to plug (18). Install plug (18).
Illustration 5 g01094899
Illustration 6 g01094896
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install two spacers (4), washer (5), O-ring seal (6), plunger (7), poppet (8) and spring (9). Note: Install screw (3) to the distance recorded in the disassembly procedure.
Install O-ring seal (10) to screw (3). Install screw (3) and nut (2).
Install two O-ring seals (13) to spool (14).
Install spring (11), poppet (12), spool (14), poppet (15) and spring (16).
Install O-ring seal (17) to plug (1). Install plug (1). End By:
Install the brake accumulator charging valve. Refer to Disassembly and Assembly, "Accumulator Charging Valve (Brake) - Install".
Caterpillar parts catalog:
Parts switch Caterpillar catalog:
120M, 12M, 140M, 14M, 160M, 16M, 216, 228, 236, 247, 248, 267, 287, 420D, 428D, 430D, 432D, 438D, 442D, 446D, 554, 564, 574, 574B, 65C, 65E, 75C, 75D, 75E, 85C, 85D, 85E, 902, 906, 906H, 906H2, 907H, ...
325C, 330C, 330C L, 345B II, 365B, 365B II, 385B, 533, 543, 65E, 75E, 814F, 814F II, 815F, 815F II, 816F, 816F II, 824G, 824G II, 824H, 825G, 825G II, 825H, 826G II, 826H, 834G, 834H, 836G, 836H, 854G...
12H, 12H ES, 12H NA, 140H, 140H ES, 140H NA, 143H, 160H, 160H ES, 160H NA, 163H NA, 16H NA, 3306B, 3406C, 3406E, 3456, 345B, 345B II, 345B II MH, 345B L, 517, 527, 545, 572R, 583R, 587R, 611, 615C, 62...
120M 2, 12M 2, 140M 2, 160M 2, 2384C, 2470C, 2484C, 24M, 2570C, 2670C, 2864C, 35, 45, 515, 525, 525B, 525C, 533, 535B, 535C, 543, 545, 545C, 55, 553C, 559C, 561N, 563C, 573C, 579C, 584, 586C, 587R, 58...
120M, 140M, 143H, 160M, 163H NA, 216B, 216B3, 226B, 226B3, 232B, 236B, 236B3, 242B, 242B3, 246C, 247B, 247B3, 24H, 252B, 252B3, 256C, 257B, 257B3, 259B3, 262C, 262C2, 267B, 268B, 272C, 277C, 277C2, 27...
320B, 322B, 322B L, 322C, 322C FM, 325B, 325B L, 330, 3306B, 330B, 330B L, 330C, 330C L, 3406C, 3412C, 345B L, 69D, 824G, 825G, 826G, 918F, 924F, 928F, 938F, 950G, 962G, 980G, AD40, AD45, AE40, AE40 I...
14H, 16H, 725, 730, 735, 740, 824G II, 824H, 834G, 834H, 844H, 854G, 854K, 924G, 924GZ, 924H, 924HZ, 928H, 928HZ, 930G, 938G II, 950G II, 950H, 962G II, 962H, 966G II, 966H, 972G II, 972H, 980G II, 98...
621H, 621K, 623H, 623K, 623K LRC, 627H, 627K, 627K LRC, 725C, 730C, 735B, 740B, 814F, 814F II, 815F, 815F II, 816F, 816F II, 824G, 824G II, 824H, 824K, 825G, 825G II, 825H, 825K, 826G, 826G II, 826H, ...
621H, 621K, 623H, 623K, 623K LRC, 627H, 627K, 627K LRC, 814F, 815F, 816F, 824G, 825G, 826G, 918F, 924F, 938F, 950F, 950F II, 950G, 960F, 962G, 966F, 966F II, 966G, 970F, 972G, 980G, IT18F, IT24F, IT28...
824G, 824G II, 824H, 825G, 825G II, 825H, 826G, 826G II, 826H, 834G, 834H, 836G, 836H, 910G, 914G, 924G, 924GZ, 928G, 930G, 938G, 938G II, 950G, 950G II, 950H, 962G, 962G II, 962H, 966G, 966G II, 966H...
824G, 825G, 826G, 950G, 950G II, 962G, 962G II, 966G, 966G II, 972G, 972G II, 980G, 980G II, 992G, D10R, D11R, FUSION
950G, 950G II, 962G, 962G II, 966G II, 972G II, 980G, 980G II, 980H
1525709
SWITCH AS-PUSH BUTTON
950G, 950G II, 962G, 962G II, 966G, 966G II, 972G, 972G II, 980G, 980G II
950G, 950G II, 962G, 962G II, 966G, 966G II, 972G, 972G II, 980G, 980G II
1253190
SWITCH AS-ADJUSTABLE
950G, 962G, 966G, 972G, 980G, R2900, R2900G
950G, 962G, 966G, 972G, 980G, R2900, R2900G
3E5520
SWITCH AS-LIMIT
844, 854G, 950G, 962G, 966G, 972G, 980G, 990, 990 II, 992G
844, 854G, 950G, 962G, 966G, 972G, 980G, 990, 990 II, 992G
824G, 824G II, 824H, 834G, 834H, 844H, 854G, 854K, 950G, 962G, 966G, 972G, 980G, 988G, 988H, 990 II, 990H, 992G, 992K, 993K, 994, 994D, 994F, R1300, R1300G, R1300G II, R1600, R1600G, R1600H, R1700G, R...
1458669
SWITCH AS-PUSH BUTTON
950G, 962G, 980G
950G, 962G, 980G
1458668
SWITCH AS-PUSH BUTTON
950G, 962G, 980G
950G, 962G, 980G
1598663
SWITCH AS-ROCKER
844, 854G, 988F II, 990 II, 992G, 994, 994D
844, 854G, 988F II, 990 II, 992G, 994, 994D
2017952
SWITCH AS-ROTARY
950G, 950G II, 950H, 962G, 962G II, 962H, 966G, 966G II, 966H, 972G, 972G II, 972H, 980G, 980G II, 980H
950G, 950G II, 950H, 962G, 962G II, 962H, 966G, 966G II, 966H, 972G, 972G II, 972H, 980G, 980G II, 980H
950G, 962G, 966G, 972G, 980G
1164506
SWITCH AS
950G, 962G, 966G, 972G, 980G
950G, 962G, 966G, 972G, 980G
824G, 825G, 826G, 950G, 950G II, 962G, 962G II, 966G, 966G II, 972G, 972G II, 980G, 980G II, 992G, D10R, D11R, FUSION
1777582
SWITCH AS-ROCKER
950G, 950G II, 950H, 950K, 962G, 962G II, 962H, 962K, 966G, 966G II, 966H, 972G, 972G II, 972H, 980G, 980G II, 980H
950G, 950G II, 950H, 950K, 962G, 962G II, 962H, 962K, 966G, 966G II, 966H, 972G, 972G II, 972H, 980G, 980G II, 980H