1598343 SWITCH-PRESSURE Caterpillar parts
3116
Rating:
Alternative (cross code) number:
CA1598343
159-8343
1598343
CA1598343
159-8343
1598343
Weight: 0.42 pounds 0 kg.
TRUCK ENGINE,
Compatible equipment models: 1598343:
Information:
Table 1
Code for High Intake Manifold Air Pressure
J1939 Code CDL Code Description
(code descriptions may vary) Information
102-16 E1044 (2) Engine Intake Manifold #1 Pressure : High - moderate severity This pressure is a variable value that is calculated by the ECM. The resulting value is dependent on the operating conditions of the engine. Probable Causes
Turbocharger wastegate
Wastegate regulatorRecommended Actions
Note: The procedures have been listed in order of probability. Complete the procedures in order.
Table 2
Troubleshooting Test Steps Values Results
1. Turbocharger Wastegate
A. Check the operation of the turbocharger wastegate.
B. Check the operation of the wastegate actuator. Refer to Systems Operation, Testing, and Adjusting, "Turbocharger - Inspect".
Turbocharger wastegate
Result: Operation of the turbocharger wastegate is suspect.
Repair: Disconnect the output rod in the wastegate actuator from the lever that operates the wastegate.
Operate the wastegate lever by hand and check for full and free movement.
Check that the output rod in the wastegate actuator is biased towards the retracted position.
Connect the output rod in the wastegate actuator to the lever that operates the wastegate.
Result: There is a suspected fault in the wastegate or the wastegate actuator.
Repair: Replace the turbocharger. Refer to Disassembly and Assembly, "Turbocharger - Remove" and Disassembly and Assembly, "Turbocharger - Install".
Result: The wastegate and the wastegate actuator operate correctly.
For C4.4 engines, contact the Dealer Solutions Network (DSN).
For C7.1 engines, proceed to Test Step 2.
2. Wastegate Regulator
A. Use the electronic service tool to check for diagnostic trouble codes that relate to the wastegate regulator.
Wastegate regulator
Result: Diagnostic codes are present that relate to the wastegate regulator.
Rectify the cause of any related codes. Refer to Troubleshooting, "Diagnostic Trouble Codes".
Result: There are no diagnostic codes that relate to the wastegate regulator.
Contact the Dealer Solutions Network (DSN).
Caterpillar parts catalog:
Parts switch Caterpillar catalog:
1125475
SWITCH-WATER TEMPERATURE
3114, 3116, 3126
3114, 3116, 3126
7E5602
SWITCH AS-PRESSURE
3114, 3116, 3126
3114, 3116, 3126
3E0074
SWITCH AS-MAGNETIC
3114, 3116
3114, 3116
1442569
SWITCH AS
3116
3116
1442593
SWITCH AS
3116
3116
1442592
SWITCH AS
3116
3116
1436549
SWITCH-TOGGLE
3116, 3126, 3126B, 3176
3116, 3126, 3126B, 3176
1436713
SWITCH AS
3406B
3406B
1436708
SWITCH AS-FOOT
3406B
3406B
1436720
SWITCH AS-PRESSURE
3406B, 3406C
3406B, 3406C
1015459
SWITCH AS-PRESSURE
3306C, 3406B, 3406C, 375 L, 5080, 515, 525, 545, 631E, 633E II, 637E, 651E, 657E, RM-250C, RR-250B
3306C, 3406B, 3406C, 375 L, 5080, 515, 525, 545, 631E, 633E II, 637E, 651E, 657E, RM-250C, RR-250B
1432570
SWITCH-TOGGLE
3306, 3306C
3306, 3306C
1436455
SWITCH-CLUTCH
3116, 3126, 3126B, 3306, 3306C, 3406B, 3406C
3116, 3126, 3126B, 3306, 3306C, 3406B, 3406C
1436490
SWITCH-CLUTCH
3306, 3406B, 3406C, D350E, D400E
3306, 3406B, 3406C, D350E, D400E
3E0074
SWITCH AS-MAGNETIC
3114, 3116
3114, 3116
9X6875
SWITCH AS-MAGNETIC
3116, AP-1000
3116, AP-1000