SWITCH GP-TEMPERATURE 1767705 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     2P-8250     Strap Wrench Assembly     1    
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the machine. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide", for tools and supplies suitable to collect and contain fluids in Caterpillar machines.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00467095
Use Tool (A) and remove oil filter (1) .
Illustration 2 g00467627
Disconnect hose assembly (2) . Remove bolt (4) and the washer. Disconnect the clip from the tube assembly. Remove bolt (8) , the washer and the spacer. Disconnect the clip from tube assembly (6) . Remove bolt (7) and the washer in order to disconnect tube assembly (5) and the washers. Remove engine oil filter base (3) , tube assemblies (5) and (6) and the gaskets.
Remove tube assemblies (5) and (6) from engine oil filter base (3) .
Remove the two O-ring seals from the top of the engine oil filter base, if necessary.
Check the condition of the gaskets and the O-ring seals. If the gaskets or the seals are worn or damaged, use new parts for replacement.