SWITCH AS 1833853 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     138-7573     Link Bracket     2    Start By:
Remove the hydraulic oil cooler. Refer to Disassembly and Assembly, "Hydraulic Oil Cooler - Remove".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01493711
Remove clips (1). Disconnect hose assembly (4). Loosen clamps (2) and remove hose (3) .
Illustration 2 g01493712
Disconnect hose assemblies (5) and harness assembly (6) .
Illustration 3 g01493713
Disconnect hose assemblies (7) .
Illustration 4 g01493714
Disconnect hose assembly (8) .
Illustration 5 g01493715
Disconnect hose assembly (9) and harness assembly (10) .
Illustration 6 g01493716
Disconnect hose assemblies (11). Remove bolts (12) and reposition valve assembly (13) .
Illustration 7 g01493717
Remove bolts (14) and bracket assembly (15) .
Illustration 8 g01493718
Remove the mounting hardware from bracket (16) .
Illustration 9 g01493719
Disconnect hose assemblies (17) .
Illustration 10 g01496953
Illustration 11 g01496973
Attach a suitable lifting device to hydraulic tank (18). Remove bolts (19). Remove hydraulic tank (18) .