SWITCH AS-ROCKER 1950916 - Caterpillar

Engine Coolant (5)This safety message is positioned on the top of the radiator tank.
Illustration 6 g01370913
The coolant is hot and the coolant is under pressure. Do not touch the hot surfaces. Refer to the Operation and Maintenance Manual for the procedure to follow when you check the radiator.
Refer to Operation and Maintenance Manual, "Cooling System Coolant Level - Check" for more information.Acid Burn Hazard (6)This safety message is positioned on the engine.
Illustration 7 g01382725
Sulfuric Acid Burn Hazard may cause serious personal injury.The NOx Reduction System (NRS) may contain a small amount of sulfuric acid. The use of fuel with sulfur levels greater than 15 ppm may increase the amount of sulfuric acid formed. The sulfuric acid may spill from the NRS cooler during service of the engine. The sulfuric acid will burn the eyes, skin, and clothing on contact. Always wear eye shields, rubber gloves, and protective clothing when you may come in contact with fluids that may spill from the NRS cooler. If fluid contacts an eye, immediately flush with water and seek medical help.
Crushing Hazard (7)This safety message is positioned on the right side of the hitch link.
Illustration 8 g01379133
Hitch and steering movement can reduce clearances suddenly and cause personal injury...Stop engine before servicing.
No Clearance (8)This safety message is positioned on each side of the steering link.
Illustration 9 g01371644
Stay back a safe distance. No clearance for a person in this area when the machine turns. Severe injury or death from crushing could occur.
Do Not Weld On The ROPS/FOPS Structure (9)This safety message is positioned outside of the cab to the left of the rear window.
Illustration 10 g01226901
Structural damage, an overturn, modification, alteration, or improper repair can impair this structure's protection capability thereby voiding this certification. Do not weld on or drill holes in the structure. Consult a Caterpillar dealer to determine this structure's limitations without voiding its certification.
This machine has been certified to the standards that are listed on the certification film. The maximum mass of the machine, which includes the operator and the attachments without a payload, should not exceed the mass on the certification film.Refer to Operation and Maintenance Manual, "Guards (Operator Protection)" for more information.Improper Connections For Jump Start Cables (10)This safety message is positioned inside the battery compartment.
Illustration 11 g01370909
Explosion Hazard! Improper jumper cable connections can cause an explosion resulting in serious injury or death. Batteries may be located in separate compartments. Refer to the Operation and Maintenance Manual for the correct jump starting procedure.
Refer to Operation and Maintenance Manual, "Engine Starting with Jump Start Cables" for more information.