2065301 SWITCH AS-LIMIT Caterpillar parts
ATS
Rating:
Alternative (cross code) number:
CA2065301
206-5301
2065301
CA2065301
206-5301
2065301
Weight: 0.01 pounds 0 kg.
AUTOMATIC TRANS SWITCH,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
ST12 Front Panel Mount Connector Female, Pack of 1, MFR: 2065301
Generic Alternate Mfr Part Number: 2065301; Contact Plating: Gold; Contact Type: Solder; IP Rating: IP67; Mating Type: Threaded; Mounting Type: Panel Mount; Number of Contacts: 3; Primary Type: Circular; || From a fantastic series of circular panel cable mount connectors made from quality materials, designed for use in harsh environments and offer excellent resistance to corrosion. || These cable mount connectors are available as male pins or female receptacles rated from 125V to 250V, and 3A to 13A current rating. These products are ideal for making your own customised connection for indoor/outdoor applications where a secure waterproof connection is required.
Generic Alternate Mfr Part Number: 2065301; Contact Plating: Gold; Contact Type: Solder; IP Rating: IP67; Mating Type: Threaded; Mounting Type: Panel Mount; Number of Contacts: 3; Primary Type: Circular; || From a fantastic series of circular panel cable mount connectors made from quality materials, designed for use in harsh environments and offer excellent resistance to corrosion. || These cable mount connectors are available as male pins or female receptacles rated from 125V to 250V, and 3A to 13A current rating. These products are ideal for making your own customised connection for indoor/outdoor applications where a secure waterproof connection is required.
$25.86
06 Feb 2020
-: -
Sea Dog 2065301 Chrome Zinc Door Hinge - 1 1 2
$8.00
02 Jun 2018
2 Hundredths Pounds
Sea-Dog: Sea-Dog
Sea Dog 206530-1 Door Hinge, 2-7/8"
Die cast zinc || Chrome plated || Sold per pair || 2-7/8" length x 1-1/2" max. height
Die cast zinc || Chrome plated || Sold per pair || 2-7/8" length x 1-1/2" max. height
Number on catalog scheme:
3
For full view, you need register
Compatible equipment models: 2065301:
Information:
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-0510 Driver Gp 1
Illustration 1 g01517968
Use Tooling (A) to install shaft seal (16). Install shaft seal (16) into housing (2). Install retaining ring (15).
Illustration 2 g01517798
Install O-ring seal (14) onto housing (2). Repeat for the opposite side of housing (2).
Illustration 3 g01517797
Install seal (12) and backup seal (13) onto bearing assembly (7).
Illustration 4 g01517796
Install seal (10) and backup seal (11) onto bearing assembly (9).
Illustration 5 g01517795
Install bearing assembly (7) onto gear assemblies (6) and (8). Install bearing assembly (9) onto gear assemblies (6) and (8).
Illustration 6 g01517794
Illustration 7 g06217986
(X) denotes the low-pressure side and (Y) denotes the high-pressure side of the pump.
Position gear assemblies (5) into housing (2).Note: Orient gear assemblies (5) into housing (2) as shown in Illustrations 6 and 7.
Illustration 8 g01517793
Install base (1), cover (3), and bolts (4) onto housing (2). Tighten bolts (4) to a torque of 140 10 N m (105 7 lb ft).End By:
Install the charge pump.
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-0510 Driver Gp 1
Illustration 1 g01517968
Use Tooling (A) to install shaft seal (16). Install shaft seal (16) into housing (2). Install retaining ring (15).
Illustration 2 g01517798
Install O-ring seal (14) onto housing (2). Repeat for the opposite side of housing (2).
Illustration 3 g01517797
Install seal (12) and backup seal (13) onto bearing assembly (7).
Illustration 4 g01517796
Install seal (10) and backup seal (11) onto bearing assembly (9).
Illustration 5 g01517795
Install bearing assembly (7) onto gear assemblies (6) and (8). Install bearing assembly (9) onto gear assemblies (6) and (8).
Illustration 6 g01517794
Illustration 7 g06217986
(X) denotes the low-pressure side and (Y) denotes the high-pressure side of the pump.
Position gear assemblies (5) into housing (2).Note: Orient gear assemblies (5) into housing (2) as shown in Illustrations 6 and 7.
Illustration 8 g01517793
Install base (1), cover (3), and bolts (4) onto housing (2). Tighten bolts (4) to a torque of 140 10 N m (105 7 lb ft).End By:
Install the charge pump.