SWITCH AS-ROCKER 2199533 - Caterpillar

Start By:
Remove the reversible fan. Refer to Disassembly and Assembly, "Reversible Fan - Remove".
Remove the aftercooler. Refer to Disassembly and Assembly, "Aftercooler - Remove".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Drain the hydraulic oil into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Hydraulic System Oil - Change".
Drain the coolant into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change".
Illustration 1 g01273438
Remove plate (1) .
Illustration 2 g01273441
Disconnect hose (2) from the bottom of the radiator assembly.
Illustration 3 g01273578
Remove clip (3) from the fan shroud.
Illustration 4 g01273442
Disconnect hoses (4) and remove clip (5) .
Illustration 5 g01273413
Remove tube (6) .
Illustration 6 g01273414
Remove brackets (7) and (8). Remove bracket (9) .
Illustration 7 g01273416
Remove tube (10) and bracket (11) .
Illustration 8 g01273418
Remove clips (12). Place tube assembly (13) to the side.
Illustration 9 g01273561
Remove bracket (14) from the front side of the radiator assembly.
Illustration 10 g01273431
Illustration 11 g01273420
Illustration 12 g01273599
Attach Tooling (A) and a suitable lifting device to radiator and hydraulic oil cooler assembly (15). The weight of radiator and hydraulic oil cooler assembly (15) is approximately 136 kg (300 lb). Remove bolts (16) and remove radiator and hydraulic oil cooler assembly (15) .