SWITCH AS-ROCKER 2238975 - Caterpillar

Table 1
Text View Options    
Items     Details    
"Alignment"     The name of the selected horizontal alignment. For example, 0 for master alignment.    
"Avoid. Dist."     The positions of the bucket tip and machine receivers are used for avoidance zone proximity detection. The "Avoid. Dist" is the shortest distance between any one point and the closest avoidance zone.    
"Bucket Name"     Displays the name of the bucket that is currently selected.    
"Bucket Slope"     Slope of the bucket.    
"Card Time"     The amount of time available on the card, to record data.    
"Cut Adjust"     When "Cut" adjustment is "Off", the text field indicates "N/A". When "Cut" adjustment is "On" and adjustment is applied, the text field shows the larger of the applied cut adjustments for the bucket tips.    
"Cut/Fill Left"     Shows either "Cut Left" or "Fill Left", as appropriate, for the left bucket tip. If a vertical offset is specified, the "Cut" or "Fill" is to the vertically offset position.    
"Cut/Fill Right"     Shows either "Cut Right" or "Fill Right", as appropriate, for the right bucket tip. If a vertical offset is specified, the "Cut" or "Fill" is to the vertically offset position.    
"Design Elev"     Design elevation at the bucket tip with focus.    
"Design Mainfall"     Mainfall of the design parallel to the direction of travel.    
"Design Name"     The name of the design that is currently loaded.    
"Design XSlope"     Cross slope of the design orthogonal to the direction of travel.    
"Easting"     Easting at the bucket tip with focus.    
"Elevation"     Elevation at the bucket tip with focus.    
"GPS Acc. Mode"     The selected "GPS Accuracy" mode is displayed. "GPS Accuracy" modes are fine, medium, and coarse.    
"H. GPS Error"     A measure of the horizontal GPS accuracy. The text is red if the value exceeds the current GPS error limit. The text is blue if the value is close to the limit. Otherwise the text is black.    
"MA Offset"     Offset from the bucket tip with focus to the master alignment. Also see the item "Offline" in this table.    
"Northing"     Northing at the bucket tip with focus.    
"Offline"     Offline distance from the bucket tip with focus to the selected alignment. If a horizontal offset is specified, the offline distance is to the horizontally offset position. Also see the item "MA Offset" in this table.    
"Offline L"     The distance from the left bucket