SWITCH-ROCKER 2365066 - Caterpillar

Illustration 1 g06144387
Top view of engine
Illustration 2 g03363038
Tightening sequence
Table 1
Specification for 380-8511 Exhaust Manifold Gp
Item Qty Part Specification Description
1 2 133-3359 Exhaust Manifold Before assembly, apply thin coat of 2P-2333 High Temperature Sealer to the OD of Male end manifold and ID of female end manifold. Remove excess sealer from the assembled joint.
2 12 106-1792 Taperlock Stud Torque to 35 5 N m (26 4 lb ft).
3 2 6V-5843 Bolt Torque to 25 7 N m (221 62 lb in).
4 1 380-8545 Exhaust Manifold Before assembly, apply thin coat of 2P-2333 High Temperature Sealer to the OD of Male end manifold and ID of female end manifold. Remove excess sealer from the assembled joint.
5 4 357-0351 Taperlock Stud Torque to 35 5 N m (26 4 lb ft).
6 12 2N-2766 Locknut Before assembly, Apply Loctite C5A copper anti-seize to the threads and to the bearing surfaces.
1. Tighten the locknuts in the numerical sequence to 20 3 N m (177 27 lb in) is shown in Illustration 2 .
2. Again tighten the locknuts in the numerical sequence to 50 5 N m (37 4 lb ft) is shown in Illustration 2 .