SWITCH GP-TOGGLE 2382478 - Caterpillar

Illustration 1 g02909098
Table 1
Specification for 296-1097 Hoe Stick Gp , 296-1101 Hoe Stick Gp , and 296-9706 Hoe Stick Gp    
Item     Qty     Part     Specification Description    
All bores must be free of paint. Coat all pin bores including bucket and cylinders with 5P-0960 Grease Cartridge .    
1     1     296-9566 Pin     Diameter is
44.890 0.020 mm (1.7673 0.0008 inch).    
2     2     166-1492 Lip Type Seal     Lubricate the sealing lip lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces outside, as shown. Install the lip type seals so that the lip type seals do not extend beyond the face of the boss.    
3     2     218-5191 Bushing     Make sure that the bushings are installed in the bore so that the identification numbers of the bushings are facing outward.
Bore of the bushing before installation is
60.200 0.025 mm (2.3701 0.0010 inch).
Installation depth is
9.5 0.8 mm (0.37 0.03 inch).    
4     2     296-9578 Lip Type Seal     Lubricate the sealing lip lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces outside, as shown. Install the lip type seals so that the lip type seals do not extend beyond the face of the boss.    
5     2     296-9438 Bushing     Make sure that the bushings are installed in the bore so that the identification numbers of the bushings are facing outward.
Bore of the bushing before installation is
50.200 0.015 mm (1.9764 0.0006 inch).
Installation depth is
9.5 0.8 mm (0.37 0.03 inch).    
6     2     150-5697 Lip Type Seal     Lubricate the sealing lip lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces outside, as shown. Install the lip type seals so that the lip type seals do not extend beyond the face of the boss.    
7     2     296-9438 Bushing     Make sure that the bushings are installed in the bore so that the identification numbers of the bushings are facing outward.
Bore of the bushing before installation is
50.200 0.015 mm (1.9764 0.0004 inch).
Installation depth is
5.5 0.8 mm (0.22 0.03 inch).    
8     2     8T-4244 Nut     Position nut (9)
0.5 mm (0.02 inch) from the end of the bolt. Tighten nut (8) against nut (9) in order to lock.    
9     2     8T-4244 Nut    
10     1     296-9567 Pin     Diameter is
54.890 0.023 mm (2.1610 0.0009 inch).    
11     2     167-9888 Shim     Use the shim between the rod end of the bucket cylinder and the stick. Thickness of one shim is
2.00 0.15 mm (0.079 0.006 inch)