SWITCH GP-TOGGLE 2382485 - Caterpillar

Table 1
Required Tools    
Part Number    Description    Qty    
1U-6602     Photo Tach     1    
Start the engine.
Position the machine on level ground.
Increase the hydraulic oil temperature to 55° 5°C (131° 9°F).
Use 1U-6602 Photo Tach to read the engine speed. Refer to Table 2 for the specifications for engine speed at the desired engine operation.
Table 2
Item    Specifications    
New Rebuild    Service Limit    
No load high idle     2220 50 rpm     2020 to 2270 rpm    
No load low idle     1000 + 100 - 0 rpm     1000 + 150 - 50 rpm    
Eco mode     2050 50 rpm     2050 100 rpm    
One touch low idle     1000 - 1300 rpm     950 - 1300 rpm    
Maximum speed with load (1)     2100 rpm (2)     2050 rpm (2)    
( 1 ) Pressure is relieved from both pumps (stall condition).
( 2 ) Minimum rpmNote: A New specification is the performance that can be expected for a new machine. A Rebuild specification is the performance that can be expected after rebuilding the components of a system. Performance beyond the Service Limit is an indication of these problems: improper maintenance or adjustment, component wear and failure.