SWITCH AS-ROCKER 2495486 - Caterpillar

Illustration 1 g03492818
Illustration 2 g03831247Hammer Operation (1)This message is located on the window on the left side of the cab.
Illustration 3 g01069767Refer to Operation and Maintenance Manual, "Hammer Operation" for more information.Joystick Control (3)This message is located in the cab on the right side window.
Illustration 4 g03495464The machine control pattern is initially set at the factory to the SAE system, as shown. The pattern on the left pertains to the left joystick and the pattern on the right pertains to the right joystick.Refer to Operation and Maintenance Manual, "Joystick Controls" for further information.Alternate Exit (3)This message is located in the center of the rear window.
Illustration 5 g01002993If the Primary exits are blocked, pull the ring in order to open the rear window. Exit the machine through the window opening.For more information, refer to Operation and Maintenance Manual, "Alternate Exit". Radial Seal Air Filters (4)This message is located on the air cleaner.
Illustration 6 g01134494To avoid engine damage, use only Caterpillar radial seal air filters. Other filters will not seal properly. Read the Operation and Maintenance Manual.Refer to Operation and Maintenance Manual, "Engine Air Filter Primary Element - Clean/Replace".Hydraulic Oil Level Check (5) This message is located in the right access compartment next to the sight gauge for the hydraulic oil .
Illustration 7 g01069075Check hydraulic oil level daily. See Operation and Maintenance Manual, "Hydraulic System Oil Level - Check" for details.No Step (6)This message is located on the cover plate for the hydraulic tank and fuel tank.
Illustration 8 g00911158Do not step in this area.Diesel Fuel Requirements (7)This message is located by the fuel tank.
Illustration 9 g03831249