2908065 SWITCH GP-RIDE CONTROL Caterpillar parts
992K
Rating:
Alternative (cross code) number:
CA2908065
290-8065
2908065
CA2908065
290-8065
2908065
WHEEL LOADER,
Compatible equipment models: 2908065:
Number on catalog scheme:
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 311-1362 Vacuum Gauge 1
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Note: Plug hose assembly. This helps to prevent fluid loss, and this helps to keep contaminants from entering the system.
Install Tooling (A) onto the hydraulic tank. Attach an air supply hose onto Tooling (A). Apply 138 kPa (20 psi) of air. This procedure will pull a vacuum on the hydraulic system.
Release the hydraulic system pressure. Refer to Disassembly and Assembly, "System Pressure - Release".
Illustration 1 g01527333
Note: Only remove bolt (1) and bolt (4). The remaining bolts are for the disassembly of gear pump (3) .
Disconnect hose assembly (2). Remove bolt (1) and bolt (4). Do not remove the remaining bolts. Remove gear pump (3) .Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 311-1362 Vacuum Gauge 1
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 2 g01527333
Position gear pump (3). Install bolt (1) and bolt (4). Connect hose assembly (3) .
Release vacuum and remove Tooling (A). Check the hydraulic level. Refer to Operation and Maintenance Manual, "Hydraulic System Oil Level - Check".
Table 1
Required Tools
Tool Part Number Part Description Qty
A 311-1362 Vacuum Gauge 1
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Note: Plug hose assembly. This helps to prevent fluid loss, and this helps to keep contaminants from entering the system.
Install Tooling (A) onto the hydraulic tank. Attach an air supply hose onto Tooling (A). Apply 138 kPa (20 psi) of air. This procedure will pull a vacuum on the hydraulic system.
Release the hydraulic system pressure. Refer to Disassembly and Assembly, "System Pressure - Release".
Illustration 1 g01527333
Note: Only remove bolt (1) and bolt (4). The remaining bolts are for the disassembly of gear pump (3) .
Disconnect hose assembly (2). Remove bolt (1) and bolt (4). Do not remove the remaining bolts. Remove gear pump (3) .Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 311-1362 Vacuum Gauge 1
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 2 g01527333
Position gear pump (3). Install bolt (1) and bolt (4). Connect hose assembly (3) .
Release vacuum and remove Tooling (A). Check the hydraulic level. Refer to Operation and Maintenance Manual, "Hydraulic System Oil Level - Check".
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Parts switch Caterpillar catalog:
2908063
SWITCH GP-LIGHT
854K, 992K
854K, 992K
2824332
SWITCH GP-ENGINE BRAKE
854K, 992K, 993K
854K, 992K, 993K
2382485
SWITCH GP-TOGGLE
311D LRR, 312D, 312D L, 312D2, 314D LCR, 315D L, 318D2 L, 319D L, 319D LN, 320D, 320D L, 320D LRR, 320D RR, 320D2, 320D2 L, 321D LCR, 323D L, 323D LN, 324D, 324D L, 325D L, 326D L, 328D LCR, 329D, 329...
311D LRR, 312D, 312D L, 312D2, 314D LCR, 315D L, 318D2 L, 319D L, 319D LN, 320D, 320D L, 320D LRR, 320D RR, 320D2, 320D2 L, 321D LCR, 323D L, 323D LN, 324D, 324D L, 325D L, 326D L, 328D LCR, 329D, 329...
2382478
SWITCH GP-TOGGLE
311D LRR, 312D, 312D L, 312D2, 314D LCR, 315D L, 318D2 L, 319D L, 319D LN, 320D, 320D L, 320D LRR, 320D RR, 320D2, 320D2 L, 321D LCR, 323D L, 323D LN, 323D2 L, 324D, 324D L, 325D L, 326D L, 328D LCR, ...
311D LRR, 312D, 312D L, 312D2, 314D LCR, 315D L, 318D2 L, 319D L, 319D LN, 320D, 320D L, 320D LRR, 320D RR, 320D2, 320D2 L, 321D LCR, 323D L, 323D LN, 323D2 L, 324D, 324D L, 325D L, 326D L, 328D LCR, ...
3477306
SWITCH GP-START
815F II
815F II
3308548
SWITCH GP-TOGGLE
814F II
814F II
2906872
SWITCH GP-ROCKER
854K, 992K
854K, 992K
2848917
SWITCH GP-ROCKER
854K, 992K
854K, 992K
2508374
SWITCH GP-ROCKER
992K, 993K
992K, 993K