SWITCH AS-ROCKER 2925606 - Caterpillar

Brake Indicator Light (2) - This indicator light indicates that the parking brake is engaged.Note: If the parking brake is engaged with the direction control switch in the FORWARD position or in the REVERSE position, the brake indicator light comes on and the action alarm will sound.
Parking Brake (3) - The alert indicator will light when the parking brake is engaged. The alert indicator should come on during start-up. The alert indicator should go out when the parking brake is released.
Hydraulic Oil Temperature (4) - This indicator indicates that the hydraulic oil is overheating. Reduce the operating speed and run the engine at low idle until the hydraulic oil temperature decreases to the normal operating temperature. Restart machine operation. If the indicator remains on, stop the engine. Check the hydraulic oil level. Check the oil cooler for any restrictions. Make any necessary repairs.
Engine Coolant Temperature (5) - This gauge displays the engine coolant temperature.
Engine Oil Pressure (6) - The alert indicator will light when the engine oil pressure is low. If this alert indicator comes on, an action alarm will sound. Stop the machine immediately. Stop the engine and investigate the cause.Do not run the engine until the cause has been corrected.
Electrical System (7) - The alert indicator will light when there is a malfunction in the electrical system. If this alert indicator comes on, the system voltage is too high for normal machine operation or too low for normal machine operation.If electrical loads are high and the engine speed is near idle, increase the engine speed to high idle. This will generate more output from the alternator. If the alert indicator for the electrical system turns off within 1 minute, the electrical system is probably operating in a normal manner. However, the electrical system may be overloaded during periods of low engine speeds.Modify the operating cycle to prevent overloading the electrical system and discharging the battery.Low idle must be set correctly. Adjust for the high side of the Low Idle specification while the most often used electrical loads are turned on. To reduce the loads, use the LOW fan speed instead of the HIGH fan speed for the blower fan motor.If this procedure does not cause the alert indicator to turn off, move to a convenient location. Investigate the cause (loose alternator belt, broken alternator belt, faulty battery, etc).If the engine speed is near operating speeds and if the electrical loads are light, the alert indicator may remain on. If the alert indicator remains on, move to a convenient location. Investigate the cause (loose alternator belt, broken alternator belt, faulty battery, etc).
Fuel Level (8) - This gauge indicates the amount of fuel that is remaining in the fuel tank. When the fuel gauge indicates that the fuel level is in the red range, add fuel immediately.
Right Directional Turn Signal (9) - The indicators will flash when the turn signal lever is operated.
Differential Lock (10) - The indicator will light when the differential lock is activated.
Hydraulic Oil Filter