SWITCH-ROCKER 2939124 - Caterpillar

1. Remove three bolts (2) to remove the turbocharger support (1) from the exhaust manifold. 2. Remove heat shield (4) along with the wire harness (3). 3. Remove nuts (6) and spacers (5). Remove exhaust manifold (7) and six gaskets. Use these same steps for the right side exhaust manifold.Install Exhaust Manifold
1. Put 9M3710 Anti-Seize Compound on the threads of studs (3). 2. Put gaskets (1) in position on the cylinder heads.3. Install exhaust manifold (2) on the studs. Install spacers, washers and nuts to hold the exhaust manifold in position. Tighten the nuts in number sequence to a torque of 40 5 lb.ft. (55 7 N m). Tighten nuts again in the same sequence to a torque of 40 5 lb.ft. (55 7 N m). 4. Install heat shield (5) along with wire harness (4). 5. Install turbocharger support (6) with the bolts that hold it.end by:a) install turbocharger