SWITCH 2987048 - Caterpillar

Hot oil and hot components can cause personal injury. Do not allow hot oil or hot components to contact the skin.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g06102397
Remove filler plug (1) and drain plug (3). Allow the oil to drain into a suitable container.
Clean and install drain plug (3).
Remove level cap (2). Fill the transfer gears to the bottom of the level cap opening.Reference: For information on lubricants and refill capacities, refer to the Operation and Maintenance Manual, "Lubricant Viscosities and Refill Capacities".
Clean and install level cap (2).
Clean and install filler plug (1).
Illustration 2 g06102398
Remove breather (4).
Wash breather (4) in clean, nonflammable solvent.
Install breather (4).