SWITCH AS 3287822 - Caterpillar

3287822 SWITCH AS Caterpillar parts

Price: query

Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA3287822
328-7822
3287822

Weight: 0.19 pounds 0 kg.

Buy SWITCH AS 3287822 Caterpillar genuine, new aftermarket tractor parts with delivery

This part in 1 request: Show. This information for suppliers only!

#1171787 3287822

2023-07-25

Number on catalog scheme: 5

Caterpillar 3287822 Parts scheme SWITCH AS

For full view, you need register

Caterpillar parts catalog:

Caterpillar parts catalog
Product:

TL642C Telehandler THG01209-UP (MACHINE) POWERED BY C3.4 Engine

463-5973: PANEL GP-INSTRUMENT » (TILT) SEBP71600490
463-6037: PANEL GP-INSTRUMENT » (TILT) SEBP71600491
463-6335: PANEL GP-INSTRUMENT » (TILT) SEBP71600492
463-6335: PANEL GP-INSTRUMENT » (TILT) SEBP71600493
463-6336: PANEL GP-INSTRUMENT » (TILT) SEBP71600494
463-6336: PANEL GP-INSTRUMENT » (TILT) SEBP71600495

TL943C Telehandler SXH00253-UP (MACHINE) POWERED BY C4.4 or C3.4 Engine

463-5973: PANEL GP-INSTRUMENT » (TILT) SEBP71610569
463-6037: PANEL GP-INSTRUMENT » (TILT) SEBP71610570
463-6335: PANEL GP-INSTRUMENT » (TILT) SEBP71610571
463-6335: PANEL GP-INSTRUMENT » (TILT) SEBP71610572
463-6336: PANEL GP-INSTRUMENT » (TILT) SEBP71610573
463-6336: PANEL GP-INSTRUMENT » (TILT) SEBP71610574

Information:

Disassembly Procedure
Start By:
Remove the oil coolers. Refer to Disassembly and Assembly, "Engine Oil Coolers - Remove". Note: This is the TYPICAL procedure for the disassembly of the oil coolers.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00552124
Typical Example
Note: Newer oil temperature regulator housings have a longer outlet.
Remove oil temperature regulator housing (1).
Illustration 2 g00552125
Remove oil cooler bonnet (2) and the gaskets.
Illustration 3 g00552126
Remove supports (3) for the oil cooler.
Illustration 4 g00552127
Mark the position of each oil cooler core in the support. Fasten a suitable lifting device to each oil cooler core (4). Remove the oil cooler cores from the support. Each oil cooler core weighs approximately 45 kg (100 lb).