SWITCH GP-TOGGLE 3365880 - Caterpillar

Changing the Time/Date
The EMCP 4 clock allows the time/date to be modified. Changing the time/date will change the timestamp on all future events, but not for existing events. (For example, an event that has occurred previously will still show the same first time/date, but if it occurs again after the time/date has been adjusted, the last time/date will reflect the change.)This procedure must be performed on the EMCP 4 display. This procedure cannot be done using the Cat ET. In order to update time/date, level 1 access is required.Perform the following steps in order to change the date format.
From the "MAIN MENU", press the arrow keys in order to highlight the "CONFIGURE" menu. Press the "OK" key.
Illustration 1 g02137854
Press the arrow keys in order to highlight "TIME/DATE". Press the"OK" key in order to select "TIME/DATE".
Illustration 2 g02140956
The "SET TIME/DATE" dialog will appear. The currently programmed time is displayed. Press the"OK" key in order to begin to edit the time.
Illustration 3 g02140957
Press the left key or the right key to select a digit. Press the up key or the down key to change the selected digits. Press the "OK" key to accept the changes. Press the escape key to cancel the changes. Change the Date
Use the following steps to change the date. Begin at the "SET TIME/DATE" screen.
Press the escape key again to return to the "SET TIME/DATE" screen.
Illustration 4 g02140957
Use the navigation keys to place the selection box around the date. Note: Alternately, pressing the "DATE" softkey from the "Set Time/Date" screen will open the set date dialog.
Illustration 5 g02309674
Press the "OK" key to enter the editor while the current date is selected.
Press the left key or the right key to select a digit. Press the up key or the down key to change the selected digits. Press the "OK" key to accept the changes. Press the escape key to cancel the changes. Change the Date Format
The data format can be set to either display in the form Month/Day/Year or the form Day/Month/Year. This procedure must be performed on the EMCP 4 display. This procedure cannot be performed with Cat ET.Note: This preference does not affect operation of the EMCP 4 or the data as viewed in Cat ET. It only affects how the date is displayed on the EMCP 4 display and the format of the event time stamps.Use the following steps to change the date format.
From the "MAIN MENU", press the arrow keys in order to highlight the "CONFIGURE" menu. Press the "OK" key.
Illustration 6 g02137854
Press the arrow keys in order to highlight "TIME/DATE". Press the"OK" key in order to select "TIME/DATE".
Illustration 7 g02140956
The "SET TIME/DATE" dialog will appear. Press the arrow keys in order to highlight "DATE FORMAT".
Illustration 8 g02309714
Press the left key, the right key, or the soft keys to select the desired format. Press the up key or the down key to change the selected digits. Press the "OK" key to accept the changes. Press the escape key to cancel the changes.