SWITCH AS-SPEED 3793359 - Caterpillar

Removal Procedure
Start By:
Remove the turbochargers. Refer to Disassembly and Assembly, "Turbocharger - Remove".
Remove the water temperature regulator housing. Refer to Disassembly and Assembly, "Water Temperature Regulator Housing - Remove and Install".
Illustration 1 g01095489
Remove locknuts (2) and spacers (1).
Remove exhaust manifold (3).
Remove exhaust manifold gaskets (4).
If necessary, remove the taperlock studs from the cylinder head. Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 5P-3931 Anti-Seize Compound -
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Install the taperlock studs in the cylinder head and tighten to a torque of 35 5 N m (26 4 lb ft).
Illustration 2 g01095489
Install exhaust manifold gaskets (4) on the taperlock studs.
Position exhaust manifold (3) on the taperlock studs. Install spacers (1). Note: Discard the locknuts after use. Use new locknuts for installation.
Apply Tooling (A) to the threads of the taperlock studs. Install locknuts (2) and tighten to a torque of 38 5 N m (28 4 lb ft). End By:
Install the water temperature regulator housing. Refer to Disassembly and Assembly, "Water Temperature Regulator Housing - Remove and Install".
Install the turbochargers. Refer to Disassembly and Assembly, "Turbocharger - Install".