SWITCH AS-PUSH BUTTON 3831854 - Caterpillar

Illustration 13 g06294350
(1a) 5P-1507 Hose ( 100 10 mm (4 0.4 inch))
(1b) 5P-1507 Hose ( 100 10 mm (4 0.4 inch))
(1c) 5P-1507 Hose ( 280 10 mm (11 0.4 inch))
(2) 1P-4278 Hose Clamp
(3) 256-2155 Tee
(4a) 539-3610 Abrasion Sleeve ( 250 10 mm (10 0.4 inch))
(C) Hose Clamp
(M) Hose Clamp
Install hose (1a) onto the fuel filter fitting and secure with hose clamp (2). Install tee (3) at the other end of the hose and secure with hose clamp (2).
Connect hose (1b) to the fuel pump and the tee and secure using existing clamp (M) and hose clamp (2).
Install abrasion sleeve (4a) onto hose (1c). Connect hose (1c) to the tee and secure using hose clamp (2).
Illustration 14 g06294338
(1c) 5P-1507 Hose ( 280 10 mm (11 0.4 inch))
(F) Hose Clamp
Connect the other end of hose (1c) to the fuel valve and secure with existing clamp (F).
Illustration 15 g06284161
(1d) 5P-1507 Hose ( 280 10 mm (11 0.4 inch))
(1e) 5P-1507 Hose ( 140 10 mm (5.5 0.4 inch))
(1f) 5P-1507 Hose ( 140 10 mm (5.5 0.4 inch))
(2) 1P-4278 Hose Clamp
(3) 256-2155 Tee
(B) Hose Clamp
(H) Hose Clamp
(L) Hose Clamp
Connect hose (1d) to the fuel pump and secure using existing clamp (B). Install tee (3) to the other end of the hose. Secure the hose to the tee using hose clamp (2).
Connect hose (1e) to the in-line fuel filter and secure using existing clamp (L). Connect the other end of the hose to the tee. Secure the hose to the tee using hose clamp (2).
Connect hose (1f) to the fuel valve and secure using existing clamp (H). Connect the other end of the hose to the tee. Secure the hose to the tee using hose clamp (2).
Illustration 16 g06283831
Remove plug (P) from the top of the fuel filter.
Illustration 17 g06294345
(1g) 5P-1507 Hose ( 500 10 mm (20 0.4 inch))
(2) 1P-4278 Hose Clamp
(5) 246-2622 Elbow As
(6) 345-3623 Check Valve As
Install check valve (6) into the plug opening. Tighten the check valve to 15 2 N m (133 18 lb in). Install fitting (5) onto the check valve. Tighten the fitting to 15 2 N m (133 18 lb in). Ensure that the fitting is positioned as shown in Illustration 17.
Illustration 18 g06294453
(1g) 5P-1507 Hose
(1h) 5P-1507 Hose ( 280 20 mm (11 0.75 inch))
(2) 1P-4278 Hose Clamp
(3) 256-2155 Tee
(J) Hose (To engine)
Connect the other end of hose (1g) to tee (3). Secure the hose with hose clamp (2).
Connect hose (J) to tee (3) and secure with hose clamp (2). Install hose (1h) to the other end of tee (3) and secure with hose clamp (2).
Illustration 19 g06296756
(1h) 5P-1507 Hose
(R) Hose clamp
Connect the other end hose (1h) to the reducer on the return line back to the fuel tank. Tighten hose clamp (R).
Illustration 20 g06294367
(4b) 539-3610 Abrasion Sleeve ( 400 10 mm (16 0.4