3C8098 SWITCH GP - Caterpillar parts
Rating:
Alternative (cross code) number:
CA3C8098
3C-8098
3C8098
CA3C8098
3C-8098
3C8098
Weight: 71 pounds 32 kg.
For full view, you need register
Information:
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-0510 Driver Gp 1
B 8T-1807 Bearing Lubricant 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01176172
Illustration 2 g01176110Note: Cool the shaft before pressing bearing onto the shaft.
Apply Tooling (B) to the outside of shaft (9).
Use Tooling (A) and a suitable press. Position bearing (7) and press into retainer (8) and onto shaft (9).
Install bolts (5) and plate (6) into shaft (9). Tighten bolts (5) to a torque of 28 7 N m (21 5 lb ft).
Illustration 3 g01176090
Install shaft assembly (4), bolts (2), and washers (3) into fan drive bracket (1). Tighten bolts (2) to a torque of 28 7 N m (21 5 lb ft). End By:
Install the fan drive. Refer to Disassembly and Assembly, "Fan Drive - Install".
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-0510 Driver Gp 1
B 8T-1807 Bearing Lubricant 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01176172
Illustration 2 g01176110Note: Cool the shaft before pressing bearing onto the shaft.
Apply Tooling (B) to the outside of shaft (9).
Use Tooling (A) and a suitable press. Position bearing (7) and press into retainer (8) and onto shaft (9).
Install bolts (5) and plate (6) into shaft (9). Tighten bolts (5) to a torque of 28 7 N m (21 5 lb ft).
Illustration 3 g01176090
Install shaft assembly (4), bolts (2), and washers (3) into fan drive bracket (1). Tighten bolts (2) to a torque of 28 7 N m (21 5 lb ft). End By:
Install the fan drive. Refer to Disassembly and Assembly, "Fan Drive - Install".