SWITCH AS-TEMPERATURE 3E0103 - Caterpillar

Throttle Down Speed Control (21)
Illustration 22 g02649502This valve controls the engine speed by regulating the signal pressure to the propel pump.Depress switch (21) in order to decrease engine speed. Regeneration Disable Control (22)
This function will deactivate the ARD.
Illustration 23 g02649505Depress switch (22) in order to deactivate regeneration function. Rear Floodlight Switch (23)
Illustration 24 g02649507Depress the switch (23) in order to turn the rear lights ON. Depress the switch again in order to turn the rear lights OFF.Differential Lock Control (24)
Illustration 25 g02649509The rear differential lock switch (24) is located on the right side panel. Press rear differential lock switch (24) in order to engage the rear differential lock. When the differential lock is engaged, both wheels on the axle will turn at the same speed. The momentary front differential lock switch is located on the right joystick. Squeeze and hold the momentary front differential lock switch in order to activate the differential lock. Release the momentary differential lock switch in order to deactivate the front differential lock. Indicator will illuminate on the IQAN-Md3 display and light on control panel will illuminate when the differential lock is engaged.Hydraulic Override Control(25)
Illustration 26 g02649517The hydraulic override switch (25) is located on the right side panel. Press and hold hydraulic override switch to enable the "limp" home hydraulic functions. Functions that will be enabled are propel, steer, and raise or lower the arm. Winch Retract (26)
Illustration 27 g03413776The winch retract switch (26) is located on the right side panel. Press the winch retract switch to spool the winch cable back onto the winch.Winch Spool (27)
Illustration 28 g03413826The winch spool switch (27) is located on the right side panel.Press the winch spool switch to release the winch cable.Hand Controls (2, 28)
The momentary front differential lock toggle switch is located on the right joystick. Squeeze the momentary front differential lock switch in order to activate the front differential lock. Release the momentary front differential lock switch in order to deactivate the front differential lock. Right Joystick Control (2)
Illustration 29 g03688904The right joystick controls the implement function and differential lock function for this machine. (A) Move the joystick to this position in order to tilt the implement downward. (B) Move the joystick to this position in order to raise the implement. (C) Move the joystick to this position in order to tilt the implement upward. (D) Move the joystick to this position in order to lower the implement. (E) Press the switch in order to open the collector arms. (F) Press the switch in order to close collector arms. (G) Press the switch in order to activate front differential lock function. Left Joystick Control (28)
Illustration 30 g03688938The left joystick controls the steering for this machine. (A) Move the joystick to this position in order to steer the machine to the right. (B) Move the joystick to this position in order to steer the machine to the left. The joystick will return to the center when the joystick is released. However, the machine will not straighten as the joystick returns to the center position.