SWITCH AS 3E7272 - Caterpillar

Engine: C4.4 (S/N: L1K1-UP; S1M1-UP)Introduction
A new 366-0023 Electronic Panel Gp has replaced 273-6214 Electronic Panel Gp and a new 366-0025 Electronic Panel Gp has replaced 273-6381 Electronic Panel Gp .Premium Control Panel
Illustration 1 g02258504
Typical examplePremium Control Module With Display (1) - The control module controls the functions of the generator set.Emergency Stop Push Button (2) - The emergency stop push button (ESPB) is used to shut down the engine during an emergency situation. The ESPB shuts off the fuel.Horn (3) - The horn activates when one of the fault indicators is illuminated. The horn can be silenced by pressing the alarm silence switch.Premium Control Module With Display
Illustration 2 g02258507
Typical exampleDOWN Key (4) - When the DOWN key is pressed, the display will scroll downward. This key is also used for scrolling to the second line that displays the values for the generator in the display for daily use.LEFT Key (5) - When the LEFT key is pressed, the display will scroll to the left.CENTER Key (6) - This key is used to select the function that has been chosen.UP Key (7) - When the UP key is pressed, the display area will scroll upward. This key is also used for scrolling to the second line that displays the values for the generator in the display for daily use.RIGHT Key (8) - When the RIGHT key is pressed, the display will scroll to the left.Display Area (9) - The display area shows information about the generator set.Fail to Start (10) - This LED will illuminate when the predetermined number of failed start actions have been completed. The LED will remain illuminated until the reset has been activated via a change in state. A change in state is that the power has switched on or off or alarm reset button has been pressed.Emergency Stop (11) - The Emergency Stop LED will be illuminated when the engine has shutdown for an emergency situation or the emergency shutdown button has been depressed. The Emergency Stop LED will remain lit until the root cause has been rectified.Not In Auto (12) - Not in Auto LED will be illuminated when the machine has the manual key (21) pressed. This means that the machine is no longer capable of an automatic start from a remote location.Common Shutdown LED (13) - Common Shutdown LED is lit when the engine has shut down for an incidence. The fault will be shown in greater detail in the main display area (9) .Close Generator Key (14) - Closes generator, only works when the controller is in manual mode. This function is a programmable option.Generator Available LED (15) - LED is ON when the generator is within limits and able to take load.Start Key (16) - The start key begins the starting sequence. The control module must be in the manual mode in order for the start key to function.Alarm Mute Key (17) - The alarm mute key turns off the alarm. The alarm mute key can be used