SWITCH AS-START 3E7341 - Caterpillar

Illustration 6 g01109973
Install bracket (34) into position. Install bolts (33) and (35).
Illustration 7 g01109968
Install bar (31). Install cotter pins (32).
Illustration 8 g01109967
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Install cushion (29). Install spring (30).
Illustration 9 g01109965
Install rod (28).
Illustration 10 g01109962
Illustration 11 g00608187
Install backrest (26). The front tooth that is on the leg of backrest (26) should engage the first tooth of the side gears, as shown. Install the bolt and nut (27).
Illustration 12 g01109940
Position belt assembly (10) and cover (23) to support assembly (13). Install spacer (21), bolt (20), and nut (23A).
Position cover (22) and install washers (24) and screws (25) to support assembly (13).
Illustration 13 g01109929
Install cover (18) to support assembly (13). Position buckle (19) and install spacer (17) and bolt (16) to support assembly (13). Install plug (15) to cover (18).
Illustration 14 g01075244
Install support assembly (13). Install the bolts and nuts (14).
Illustration 15 g01075241
Install the bottom of seat cushion (12) so that the bottom of seat cushion (12) snaps into the bottom of the seat back.
Illustration 16 g01075238
Install bolt (11) into belt assembly (10).
Illustration 17 g01075181
Install armrest (6). Install nuts (7). Install retainer (8). Install bolt (9).
Illustration 18 g01075180
Install cover (5). Install bolts (4).
Illustration 19 g01075179
Install seal assembly (1) onto suspension assembly (3). Install stop bolt (2).
Install the seat into the machine.