SWITCH AS 4186593 - Caterpillar

Do not use again
Illustration 19 g02508818
Damaged block.Do not use againLinks
Illustration 20 g02508820
Broken link.Do not use again
Illustration 21 g02508821
Cracked link.Do not use againYokes
Illustration 22 g02508822
Large nick on yoke.Do not use again
Illustration 23 g02508823
Hole in former design yoke.
Illustration 24 g02508824
Parts used to block hole in former design yoke.
Illustration 25 g02508825
Position slot on seal toward bottom of counterbore.
Illustration 26 g02508826
O-ring seal and shim in place to block unused hole in former design yoke.Pins
Illustration 27 g02508827
Metal transfer on pin.Do not use again
Illustration 28 g02508828
Metal transfer on pin.Do not use again
Illustration 29 g02508829
Metal transfer on pin.Do not use again
Illustration 30 g02508830
Metal transfer on pin.Do not use again
Illustration 31 g02508831
Light scratches.Use againSlot And Hole Alignment
The slot (wide tooth space) on the 4T-7479 Yoke must be aligned with the two holes in the 4T-1692 Yoke.
Illustration 32 g02508832
Correct slot and hole alignment for assembled universal joint assembly.