SWITCH AS-ROCKER 4688069 - Caterpillar

4688069 SWITCH AS-ROCKER Caterpillar parts

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA4688069
468-8069
4688069

Weight: 0.05 pounds 0 kg.

Buy SWITCH AS-ROCKER 4688069 Caterpillar genuine, new aftermarket tractor parts with delivery

Number on catalog scheme: 33

Caterpillar 4688069 Parts scheme SWITCH AS-ROCKER

For full view, you need register

Information:

Removal Procedure
Start By:
Connect the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Personal injury can result from hot oil spray.Make sure all attachments have been lowered, oil is cool and the pressure has been released from the hydraulic system before removing any components or lines.Be sure there is no pressure in the tubing before it is disconnected from the fitting.Do not allow hot oil or components to contact skin.
Note: Put identification marks on all lines, on all hoses, on all wires and on all tubes for installation purposes. Plug all lines, all hoses and all tubes. This will help prevent fluid loss and this will help to prevent contaminants from entering the system.Note: The modulating valve for the torque converter impeller clutch is mounted on the torque converter below the steering pump.
Illustration 1 g01247452
Disconnect harness assembly (3).
Remove bolts (2).
Remove modulating valve (1).
Illustration 2 g00681068
Remove seal (4) from modulating valve (1). Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 3 g00681068
Install a new seal (4) on modulating valve (1).
Illustration 4 g01247452
Install modulating valve (1).
Install bolts (2).
Connect harness assembly (3). End By:
Disconnect the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".