SWITCH-ROCKER 4803489 - Caterpillar

Removal Procedure
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01959982
Disconnect harness assembly (1).
Remove coolant temperature sensor (2) from the adapter.
Remove the O-ring seal from coolant temperature sensor (2). Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 5P-3975 Rubber Lubricant -
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g01959982
Install a new O-ring seal on coolant temperature sensor (2).
Apply Tooling (A) to the O-ring seal prior to installation.
Install coolant temperature sensor (2) in the adapter. Tighten coolant temperature sensor (2) to a torque of 20 3 N m (175 27 lb in).
Connect harness assembly (1).