SWITCH AS-MULTIFUNCTION 4860743 - Caterpillar

Table 1
Customer Specified Parameters
ECM Parameter Possible Values Default Value
Engine Rating Parameter
"Rating Number" 1 to 4 1
Low/High Idle Parameters
"Low Idle Speed" 700 to 1200 rpm 750 rpm
"High Idle Speed" 1900 to 2900 rpm 2650 rpm
ECM Identification Parameter
"Equipment ID" 17 Digits
Available characters are dependent on the service tool that is used XXXXXXXX
Miscellaneous
"Monitoring Mode Derates" Disabled
Enabled Enabled
"Limp Home Desired Engine Speed" 700 to 1800 rpm 1200 rpm
J1939 Continuous Fault Handling
"Remote Torque Speed Control Enable Status" Disabled
Enabled Disabled
Configurable Inputs
"Coolant Level Sensor" Not Installed Not Installed
"Air Filter Restriction Switch Installation Status" Not Installed Not Installed
"Fuel/Water Separator Switch Installation Status" Not Installed
Installed Not Installed
"User Defined Switch Installation Status" Not Installed
Installed Installed