SWITCH 4947937 - Caterpillar

Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Personal injury or death can result from sudden movement of the lift cylinders or the tilt cylinders. Do not stand under the work tool when you are testing or adjusting the lift cylinders or the tilt cylinders.Do not stand under the lift arms when you are testing or adjusting the lift cylinders or the tilt cylinders.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Table 1
Required Tools
Tool Part Number Part Description Qty
A Blocking Plate
9S-8095 Block Plate(1) 1
8F-6711 O-Ring Seal(1) 1
7X-2554 Bolt 4
(1) Part of 5P-8687 Test Tooling Group
Prepare the machine for testing by completing the procedure that is specified in