SWITCH-ALARM 5142494 - Caterpillar

Illustration 21 g06218067
Disassemble differential assembly (27).
Illustration 22 g06218068
Use a suitable press to remove ring gear (32) from differential carrier (31).
Illustration 23 g06218069
Use Tooling (C) to remove bearing race (33). Remove shim (34).
Illustration 24 g06218071
Remove nut (35). Remove input flange (36).
Illustration 25 g06218072
Remove lip seal (37).
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Illustration 26 g06218075
Remove bolts (38). Remove brake housing cover (39).
Illustration 27 g06218077
Remove disc carrier (40). Remove springs (41).
Illustration 28 g06218418
Use Tooling (D) to remove pinion (42).
Illustration 29 g06218081
Remove spacer (43). Use Tooling (B) to remove bearing (44).
Illustration 30 g06218083
Use a suitable punch and suitable hammer to remove bearing race (45). Remove the shim behind bearing race (45).
Illustration 31 g06218302
Use Tooling (C) to remove bearing race (46).
Illustration 32 g06218306
Remove all the bolts and install Tooling (A). Use a suitable soft hammer to remove brake housing (47).
Illustration 33 g06218307
Use air pressure to remove piston (48).
Illustration 34 g06218311
Remove discs (49).
Illustration 35 g06218316
Remove o-ring seals (50), (51) and (52).