SWITCH AS-PUSH BUTTON 5258794 - Caterpillar

5258794 SWITCH AS-PUSH BUTTON Caterpillar parts

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA5258794
525-8794
5258794

Caterpillar 5258794 SWITCH AS-PUSH BUTTON

Weight: 0.08 pounds 0 kg.

Buy SWITCH AS-PUSH BUTTON 5258794 Caterpillar genuine, new aftermarket tractor parts with delivery

Number on catalog scheme:

Caterpillar 5258794 Parts scheme SWITCH AS-PUSH BUTTON

For full view, you need register

Information:

This Program must be administered as soon as possible. When reporting the repair, use "PI3309" as the Part Number, "7751" as the Group Number, "56" as the Warranty Claim Description Code and "T" as the SIMS Description Code. Exception: If the repair is done after failure, use "PI3309" as the Part Number, "7751" as the Group Number, "96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code.
Completion Date
December 31, 1999Termination Date
June 30, 2000Problem
The bolts that hold the swing gear outer race to the upper frame need to be tightened on certain 322B, 322B L, 325B, 325B L, 330B and 330B L Excavators. These bolts were not tightened with the specified torque and need to be re-tightened.
Affected Product
Model & Identification Number
322B (8MR214-215)
322B L (8NR268-270)
325B (8PR293-302)
325B L (8RR437-454, 8RR457-497)
330B (8SR466-468, 8SR470)
330B L (8TR572-578, 8TR580-598, 8TR600-606, 8TR608-617)
Parts Needed
Dealers will not need to order parts for this Program.
Action Required
Two people are required to do this rework smoothly. It is needed to swing the machine during the rework. Send a signal to each other before swinging machine for Safety. Tighten the bolts that hold the swing gear bearing outer race to the upper frame to a torque of 900 100 N m with a torque multiplier.
Do not need to tighten the bolts that hold the swing gear bearing inner race to the lower frame.
Tightening method:
a. One person should hold the torque multiplier and one person handle the torque bar.b. Put a mark on the bolts tightened. Swing the machine as needed to access more bolts.c. Repeat the work until all bolts have been re-tightened.Owner Notification
U.S. and Canadian owners will receive the attached Owner Notification.
Service Claim Allowances
This is a 4-hour job.
U.S. and Canadian Dealers Only - Eligible dealers may enter a Type 2 SIMS Report.
MAKE EVERY EFFORT TO COMPLETE THIS PROGRAM AS SOON AS POSSIBLE.
Attach.(1-Owner Notification)Copy Of Owner Notification For U.S. And Canadian Owners