SWITCH 5298948 - Caterpillar

Removal Procedure
Start By:
Connect the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
Remove the lifting group. Refer to Disassembly and Assembly, "Lifting Group - Remove and Install".
Illustration 1 g01458625
Remove bolts (1) .
Illustration 2 g01458628
Remove bolts (3). Lift up console assembly (2) and tilt console assembly (2) toward the engine enclosure.
Illustration 3 g01458956
Remove bolts (5). Lower metering pump (6) out of the way. Remove steering column assembly (4) .Installation Procedure
Illustration 4 g01458956
Install metering pump (6), steering column (4), and bolts (5) .
Illustration 5 g01458628
Lift up console assembly (2) and place console assembly (2) into position. Install bolts (3) .
Illustration 6 g01458625
Install bolts (1) .End By:
Install the lifting group. Refer to Disassembly and Assembly, "Lifting Group - Remove and Install".
Disconnect the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".