SWITCH 5409550 - Caterpillar

Tilting Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Loctite Graphite - 50 Anti-seize Lubricant -
Illustration 1 g06263392
Attach strap (1) to the door assembly. Shut the door assemblies on the cab.
Illustration 2 g06258782
Right side of cab.
Open cover assembly (2).
Illustration 3 g06258381
Open right side cover assembly (3).
Repeat steps 1 through 3 for the opposite side cover assemblies.
Illustration 4 g06258744
Remove bolt (4), and bolts (5).
Illustration 5 g06258749
Components have been removed for photographic clarity.
Remove bolts (6).
Illustration 6 g06258398
Rotate rack assembly (7), and install lock pin (8).
Illustration 7 g06258769
Illustration 8 g06258861
Remove pin assembly (12), and bolts (13).
Repeat Step 8 for the rear support on the opposite side of the machine.
Use handle (9) and pump assembly (11) to tilt cab (10). Extend the cab tilt cylinder until support (14) can be installed. Install support (14) and secure support (14) using pin assembly (12) as shown in 8.Lowering Procedure
Lower cab (10) in the reverse order of tilting.
Apply Tooling (A) to the threads and under the heads of bolts (13).