SWITCH AS-LIMIT 6T1990 - Caterpillar

Illustration 1 g03256056
Table 1
Specification for 294-2671 Torque Converter Gp
Item Qty Part Specification Description
1 1 Lockup clutch Thickness of three new discs and two new plates is 21.35 0.50 mm (0.840 0.020 inch).
3 336-9313 Friction Disc Thickness of one new Disc is 4.83 0.08 mm (0.19 0.003 inch).
2 1T-1315 Plate Thickness of one new Plate is 3.43 0.13 mm (0.135 0.005 inch).
2 1 9K-2175 Setscrew Apply Loctite 7649 and then apply Loctite 271 prior to installation.
3 6 4S-5565 Bolt Torque to 50 7 N m (37 5 lb ft).
4 1 8B-5144 Bolt Torque to 240 25 N m (177 18 lb ft).
5 2 0T-0768 Bolt Torque to 80 10 N m (59 7 lb ft).
6 18 8M-2530 Bolt Torque to 120 15 N m (89 11 lb ft).
7 36 3B-1915 Bolt Torque to 50 7 N m (37 5 lb ft).
8 8 5P-5855 Bolt Torque to 120 15 N m (89 11 lb ft).
9 13 1T-0680 Freewheel Spring Always install new springs in the one-way clutch. Install with the maximum loops to the outside of the cam for the one-way clutch.
10 13 1T-1410 Freewheel Roller Always install new rollers in the one-way clutch.
The stator should only turn in a clockwise direction, as the torque converter is viewed from the engine side.
Table 2
Clearance Between Components Clearance Across the Diameter Running Clearance (1)
(A) Stator and Turbine New 0.72 to 0.92 mm (0.028 to 0.036 inch) 0.36 to 0.46 mm (0.014 to 0.018 inch)
Maximum worn 1.37 mm (0.054 inch) 0.68 mm (0.027 inch)
(B) Stator and Impeller New 0.72 to 0.92 mm (0.028 to 0.036 inch) 0.36 to 0.46 mm (0.014 to 0.018 inch)
Maximum worn 1.37 mm (0.054 inch) 0.68 mm (0.027 inch)
(C) Stator and Ring New 0.56 to 0.71 mm (0.022 to 0.028 inch) 0.28 to 0.36 mm (0.011 to 0.014 inch)
Maximum worn 1.07 mm (0.042 inch) 0.53 mm (0.021 inch)
(1) Half of the clearance across the diameter.