SWITCH AS 6T6068 - Caterpillar

Illustration 1 g03889457
Table 1
Specification for 250-2078 Stub Boom    
Item    Qty    Part    Specification Description    
All bores must be free of paint. Use 5P-0960 Grease Cartridge in order to coat all bores for the pins, the bushings, the fore boom, upper frame, and the cylinder pin bores.    
1     6     7X-2553 Bolt     Torque to
240 20 N m (177 15 lb ft).    
2     2     093-0090 Shim     As required, use the shims in order to adjust the minimum lateral clearance of
0.5 mm (0.02 inch) to the maximum lateral clearance of
1.6 mm (0.06 inch) for each boom cylinder eye.
Thickness is
1.0 mm (0.04 inch).    
3     2     9X-4597 Lip Type Seal     Lubricate the sealing lip lightly with the lubricant that is being sealed.    
4     1     188-3351 Pin     Diameter is
99.95 0.04 mm (3.935 0.002 inch).    
5     2     7Y-2397 Bushing     Bore before assembly is
100.29 0.02 mm (3.948 0.001 inch).
Installation depth is
9.5 0.5 mm (0.37 0.02 inch).    
6     1     7Y-3355 Shim     As required, use the shims in order to adjust the maximum lateral clearance of
0.8 mm (0.03 inch).
Thickness is
1.6 mm (0.06 inch).    
7     1     133-2427 Shim     As required, use the shims in order to adjust the minimum lateral clearance of
0.5 mm (0.02 inch) to the maximum lateral clearance of
1.6 mm (0.06 inch) for each boom cylinder eye.
Thickness is
0.5 mm (0.02 inch).    
8     1     093-0122 Shim     As required, use the shims in order to adjust the minimum lateral clearance of
0.5 mm (0.02 inch) to the maximum lateral clearance of
1.6 mm (0.06 inch) for each boom cylinder eye.
Thickness is
2.0 mm (0.08 inch).    
9     2     7X-4803 Lip Type Seal     Lubricate the sealing lip lightly with the lubricant that is being sealed.    
10     2     257-2216 Bushing     Bore before assembly is
90.31 0.04 mm (3.556 0.002 inch).
Installation depth is
9.5 0.5 mm (0.37 0.02 inch).    
11     2     8T-4780 Bolt     Torque to
325 40 N m (240 30 lb ft).    
12     1     188-3354 Pin As     Diameter is
99.95 0.04 mm (3.935 0.002 inch).    
13     As required, use the following shims in order to adjust the minimum lateral clearance of
0.5 mm (0.02 inch) to the maximum lateral clearance of
0.8 mm (0.03 inch):    
1 133-2427 Shim     Thickness is
0.5 mm (0.02 inch).    
1 093-0122 Shim     Thickness is
2.0 mm (0.08 inch).    
14     As required, use the following shims in order to adjust the minimum lateral clearance of
0.5 mm (0.02 inch) to the maximum lateral clearance of
0.8 mm (0.03 inch):    
1 093-0090 Shim     Thickness is
1.0 mm (0.04 inch).    
1 7Y-3355 Shim     Thickness is
1.6 mm (0.06 inch).