SWITCH AS-TOGGLE 8D2676 - Caterpillar

Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00739963
3056 marine engine is shown.
Remove turbocharger cover (1) from the turbocharger.Note: The turbocharger cover is constructed of fiberglass. Wear a mask when the turbocharger cover is removed.
Illustration 2 g00739980
3056 marine engine is shown.
Remove hose (2) that connects the air cleaner to the turbocharger.
Illustration 3 g00740016
3056 marine engine is shown.
Remove hose (4) that connects the air cleaner to the crankcase breather.
Remove support bracket (5) from the air cleaner.
Remove air cleaner (3) from the turbocharger.
Remove the exhaust elbow from the turbocharger. Refer to Disassembly and Assembly, "Exhaust Elbow - Remove and Install".
Illustration 4 g00743178
Typical example
If equipped, remove the hose clamp which fastens the compressor outlet to air inlet hose (6) of the aftercooler.
Illustration 5 g00740079
Remove the bolts from flange (7) of oil supply line (8) .
Remove pipe connection (9) from union (10). Use a wrench to hold union (10) while pipe connection (9) is removed.
Remove the bolts from flanges (12) of oil drain line (11). Remove the oil drain line from the turbocharger.
Illustration 6 g00740127
The 3056 marine engine is shown.
Remove the four nuts from studs (14) that hold turbocharger (13) onto inlet and exhaust manifold (15). Remove the turbocharger from the inlet and exhaust manifold.