9X1344 SWITCH AS-PRESSURE Caterpillar parts
215D, 229D, D11N
Rating:
Alternative (cross code) number:
CA9X1344
9X-1344
9X1344
CA9X1344
9X-1344
9X1344
Weight: 0.37 pounds 0 kg.
EXCAVATOR, TRACK-TYPE TRACTOR,
Number on catalog scheme:
24
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 235-0518 Valve Spring Compression Group 1 Start By:
Remove the electronic unit injectors. Refer to Disassembly and Assembly, "Electronic Unit Injector - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: The following procedure is for the removal of the inlet valve springs and the exhaust valve springs without removing the cylinder head. This procedure can be performed on only one cylinder at a time. This will prevent the inlet valves and the exhaust valves from falling into the cylinder.
Rotate the crankshaft in order to bring the piston to the top center position in the cylinder.
Illustration 1 g01136330
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Install Tooling (A) on the cylinder head.
Remove retainer locks (1) .
Remove Tooling (A) .
Remove valve rotators (2) .
Remove valve springs (3) and valve springs (4) from each valve.
Remove bases (5) from the cylinder head.Note: Install the valve springs before you rotate the crankshaft.Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 235-0518 Valve Spring Compression Group 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g01136330
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Lubricate the valve stems with clean engine oil.
Install bases (5) for the valve springs.
Install valve springs (4) and valve springs (3) .
Install valve rotators (2) .
Install Tooling (A) .
Install retainer locks (1) .
Remove Tooling (A) .End By: Install the electronic unit injectors. Refer to Disassembly and Assembly, "Electronic Unit Injector - Install".
Table 1
Required Tools
Tool Part Number Part Description Qty
A 235-0518 Valve Spring Compression Group 1 Start By:
Remove the electronic unit injectors. Refer to Disassembly and Assembly, "Electronic Unit Injector - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: The following procedure is for the removal of the inlet valve springs and the exhaust valve springs without removing the cylinder head. This procedure can be performed on only one cylinder at a time. This will prevent the inlet valves and the exhaust valves from falling into the cylinder.
Rotate the crankshaft in order to bring the piston to the top center position in the cylinder.
Illustration 1 g01136330
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Install Tooling (A) on the cylinder head.
Remove retainer locks (1) .
Remove Tooling (A) .
Remove valve rotators (2) .
Remove valve springs (3) and valve springs (4) from each valve.
Remove bases (5) from the cylinder head.Note: Install the valve springs before you rotate the crankshaft.Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 235-0518 Valve Spring Compression Group 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g01136330
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Lubricate the valve stems with clean engine oil.
Install bases (5) for the valve springs.
Install valve springs (4) and valve springs (3) .
Install valve rotators (2) .
Install Tooling (A) .
Install retainer locks (1) .
Remove Tooling (A) .End By: Install the electronic unit injectors. Refer to Disassembly and Assembly, "Electronic Unit Injector - Install".
Caterpillar parts catalog:
Parts switch Caterpillar catalog:
120G, 12G, 130G, 140G, 143H, 14G, 160G, 163H NA, 16G, 215, 215B, 215C, 215D, 219D, 225, 225D, 227, 229, 229D, 235, 235B, 235C, 245, 245B, 2470C, 2570C, 2670C, 2864C, 307, 3508, 3508B, 3508C, 3512, 351...
578, 589, 769C, 772B, 773B, 777, 777B, 785, 789, 824C, 826C, 834B, 980C, 988B, 992C, D10, D10N, D11N, D4H, D4HTSK II, D5H, D5HTSK II, D6H, D6H II, D7H, D8L, D8N, D9L, D9N
120G, 120H, 120H ES, 120H NA, 12G, 12H, 12H ES, 12H NA, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 16G, 16H NA, 215B, 215C, 215D, 219D...
1090, 1190, 1190T, 120, 120B, 120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 120M 2, 1290T, 12G, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 130G, 135H, 135H NA, 1390, 140B, 140G, 140H,...
120G, 12G, 130G, 140G, 14G, 160G, 16G, 215D, 225, 225D, 229, 229D, 231D, 235C, 235D, 245B, 245D, 311, 312, 315, 315B, 315B FM L, 317, 320 L, 320B, 320B FM LL, 320B L, 322 FM L, 322B, 322B L, 322B LN, ...
311F LRR, 312E, 312E L, 315, 315B, 315B FM L, 315C, 315D L, 316E L, 317B LN, 318B, 318E L, 319D L, 319D LN, 320, 320 L, 320B, 320B FM LL, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320...
10-20B, 10B, 120G, 12G, 130G, 140G, 14G, 160G, 16G, 215D, 225D, 227, 229, 235C, 235D, 245B, 245D, 416, 426, 428, 436, 446, 517, 527, 578, 583R, 587R, 589, 651E, 657E, 8-16B, 824C, 826C, 834B, 836, 980...
215B, 245, 416, 426, 428, 436, 446, 508, 578, 589, 613C, 615, 615C, 651E, 657E, 773B, 777, 777B, 824C, 826C, 916, 926, 926A, 936, 936F, 980C, 994D, CS-643, D10N, D11N, D350E, D400E, D40D, D4H, D4HTSK ...
5130, 5130B, 5230, 5230B, 651E, 657E, 776C, 776D, 777D, 784B, 785, 785B, 789B, 793B, 793C, 854G, 992G, 994F, 994H, D11N
9X9966
SWITCH AS-PRESSURE
215D, 231D, 235C, 245B, AD40, AD45, AE40, D25D, IT24F, IT28F, R1700 II
215D, 231D, 235C, 245B, AD40, AD45, AE40, D25D, IT24F, IT28F, R1700 II
3E5157
SWITCH AS-PRESSURE
225D, 229, 245B
225D, 229, 245B
6C1858
SWITCH AS-PRESSURE
225D, 229, 229D, 231D, 245B, 245D
225D, 229, 229D, 231D, 245B, 245D
9X5446
SWITCH AS
130G, 235, 953, 955L, 980C, D6H
130G, 235, 953, 955L, 980C, D6H
8R7648
SWITCH AS
245B
245B
8R7647
SWITCH AS
245B
245B
1004316
SWITCH AS
245B, 245D
245B, 245D
225D, 231D, 776C, 980F II, CB-434, CS-531, CS-533, D4H, D4H XL, D4HTSK II, D4HTSK III, D7G, PR-450C, RR-250, SS-250
6C5762
SWITCH AS
235C, 245D
235C, 245D
6C5761
SWITCH AS-TEMPERATURE
235C, 245D
235C, 245D
6C4003
SWITCH AS
229D, 231D, 235C
229D, 231D, 235C
120B, 120G, 12E, 12F, 12G, 130G, 140, 140B, 140G, 14E, 14G, 16, 160G, 16G, 231D, 235D, 320C FM, 322B L, 325B L, 325C FM, 325D FM, 325D FM LL, 330B L, 330C FM, 330D FM, 568 FM LL, 611, 613C, 613C II, 6...