SWIVEL AS 4412861 - Caterpillar

Industrial Engines:
3208 (S/N: 03Z; 90N)
Marine Engines:
3208 (S/N: 01Z)
Generator Set Engines:
3208 (S/N: 30A; 5YF)
Disassembly and Assembly, SENR2135-02, "3208 Marine Engine", "Fuel Injection Pumps"Disassembly and Assembly, SENR2535-01, "3208 Generator Set Engine", "Fuel Injection Pumps"Disassembly and Assembly, SENR3689-01, "3208 Industrial Engine", "Fuel Injection Pumps"Disassembly and Assembly, SENR4631-00, "3208 Industrial and Marine Engines", "Fuel Injection Pumps"The torque procedure for the bushings that retain the fuel injection pumps has changed. Please note this change in the appropriate module.The change is shown in the text that follows for Disassembly and Assembly, SENR2535-01, "Fuel Injection Pumps", "Install Fuel Injection Pumps" and Disassembly and Assembly, SENR3689-01, "Fuel Injection Pumps", "Install Fuel Injection Pumps".3. On engines with a horsepower rating of 325 horsepower or less, use Tool (A) and tighten the bushing to a torque of 95 7 N m (70 5 lb ft). On engines with a horsepower rating that is greater than 325 horsepower, the bushings should be replaced, if the bushings have been removed. On engines with a horsepower rating that is greater than 325 horsepower, perform the following procedure to tighten the bushings.3a. Tighten the bushing to a torque of 95 7 N m (70 5 lb ft).3b. Loosen the bushing for 15 degrees.3c. Tighten the bushing again to a torque of 95 7 N m (70 5 lb ft).The change is shown in the text that follows for Disassembly and Assembly, SENR2135-02, "Fuel Injection Pumps", "Remove and Install Fuel Injection Pumps" and Disassembly and Assembly, SENR4631-00, "Fuel Injection Pumps", "Remove and Install Fuel Injection Pumps".10. On engines with a horsepower rating of 325 horsepower or less, use Tool (A) and tighten the bushing to a torque of 95 7 N m (70 5 lb ft). On engines with a horsepower rating that is greater than 325 horsepower, the bushings should be replaced, if the bushings have been removed. On engines with a horsepower rating that is greater than 325 horsepower, perform the following procedure to tighten the bushings.10a. Tighten the bushing to a torque of 95 7 N m (70 5 lb ft).10b. Loosen the bushing for 15 degrees.10c. Tighten the bushing again to a torque of 95 7 N m (70 5 lb ft).