SWIVEL 5292765 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     4C-9507     Retaining Compound     1    
B     8T-5096     Dial Indicator Gp     1    
Illustration 1 g01244938
Apply Tooling (A) to axle (24) .
Illustration 2 g01244710
Lower the temperature of bearings (23). Install the upper and lower bearing (23) in axle (24) .
Illustration 3 g01244952
Attach a suitable lifting device to housing (13) and planetary (19). Install the shims, axle pin (17), and bolts (15). Install the axle pin and the bolts in the bottom of housing (13). Place Tooling (B) on the axle, as shown. Use a suitable pry bar and move housing (13) up and down. Add or subtract the shims in order to achieve a 2.29 0.76 mm (0.090 0.030 inch) distance between the axle and housing (13). The weight of planetary (19), housing (13) and the piston motor is approximately 390 kg (859 lb).
Illustration 4 g01245158
Remove two bolts (15). Install bracket (16) and bolts (15) .
Connect hose assemblies (18) to the piston motor.
Illustration 5 g01245377
Install steering link group (14) in housing (13). Install nut (12) and cotter pin (11) on steering link group (14) .
Reposition hydraulic cylinder (10). Install pin assembly (9) and bolt (8) .
Illustration 6 g01245387
Connect hose assembly (7) .
Illustration 7 g01245390
Install bracket (6) and bolts (5) .
Connect harness assembly (4) .
Illustration 8 g01245391
Connect hose assembly (3) .
Install cover (1) and bolts (2) .
Fill the hydraulic oil tank with hydraulic oil. Refer to Operation and Maintenance Manual for the correct procedure.End By: Install the tire and rim (front). Refer to Disassembly and Assembly, "Tire and Rim (Front) - Remove and Install".