SWIVEL JOINT GP 8J4568 - Caterpillar

Illustration 9 g01035501
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Position cover (22) onto steering control valve (1). Install bolts (29) that secure cover (22) to steering control valve (1) .
Illustration 10 g01035499
Illustration 11 g01035500
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install poppet (23), spring (24), and spacer (25) into cover (22). Install O-ring seal (26) onto retainer assembly (27). Install retainer assembly (27) into cover (22). Install nut (28). Tighten nut (28) to a torque of 50 7 N m (37 5 lb ft).
Illustration 12 g01035498
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install O-ring seals (20) and O-ring seal (15) onto check valve (12). Install the O-ring seal and stem (16) into check valve (12). Install O-ring seal (21) and plug (17) into check valve (12). Install check ball (19), spring (14) and spacer (18) into check valve (12). Use Tooling (A) to install retaining ring (13) into check valve (12) .
Repeat Step 12 for check valve (11) .
Illustration 13 g01035496
Install check valves (11) and (12) into check and relief valve (5) .
Illustration 14 g01035494
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install the O-ring seals and plug (6) into check and relief valve (5). Install the O-ring seals, the rings, and valves (10) into check and relief valve (5). Install check balls (9), springs (8), the O-ring seals, and plugs (7) into check and relief valve (5) .
Illustration 15 g01160560
Position the O-ring seals and check and relief valve (5) onto steering control valve (1). Install check and relief valve (5) to steering control valve (1) .
Illustration 16 g01035491
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install strainer (4), spring (3), and plug (2) into steering control valve (1) .
Adjust the steering control valve. Refer to Testing and Adjusting for information on adjusting the steering control valve.End By: Install the steering control valve. Refer to Disassembly and Assembly, "Steering Control Valve - Install".