SWIVEL GP 9J3567 - Caterpillar

Firing order (injection sequence) ... 1, 3, 4, 2Injection timing before TC (top center) ... 21 1°(1) Torque for bushing ... 120 10 lb. ft.(160 14 N m)(2) 7N1067 Spring: Length under test force ... 1.713 in.(43.52 mm)Test force ... 26.2 1.3 lb.(116.5 5.8 N)Free length after test ... 1.918 in.(48.73 mm)Outside diameter ... 1.02 in.(25.9 mm)(3) Length of pump plunger (new) ... 2.9089 .0005 in.(73.886 0.013 mm) Minimum permissible lenth (worn) ... 2.9084 in.(73.873 mm)(4) Bore in the bearings for the rack: Bearing at the rear ... .5018 .0018 in.(12.746 0.045 mm)Bearing at the front ... .5026 .0018 in.(12.767 0.045 mm)Diameter of fuel rack ... .4985 .0002 in.(12.662 0.005 mm)(5) Bore in bearings for the camshaft: Front ... 2.1689 .0015 in.(55.090 0.038 mm)Rear ... 2.6905 .0015 in.(68.339 0.038 mm)Camshaft bearing surface (journal) diameter:Front ... 2.1654 .0005 in.(55.000 0.013 mm)Rear ... 2.6870 .0005 in.(68.250 0.013 mm)Torque for the nuts that hold the fuel lines (use 5P144 Fuel Line Socket) ... 30 5 lb. ft.(40 7 N m)