TAMPER GP-SCREED 4333185 - Caterpillar

4333185 TAMPER GP-SCREED Caterpillar parts AS4173

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA4333185
433-3185
4333185

Buy TAMPER GP-SCREED 4333185 Caterpillar genuine, new aftermarket tractor parts with delivery
ASPHALT SCREED,

Compare Prices: .

As an associate, we earn commssions on qualifying purchases through the links below

Yankee - 433-.3185 - YANKEE Chucking Reamer: 0.3185, 5/16 in Shank Dia, 1 1/2 in Flute Lg, 6 in Overall Lg

$96.46

26 Nov 2024

US: Neobits_

Yankee - 433-.3185 - YANKEE Chucking Reamer: 0.3185, 5/16 in Shank Dia, 1 1/2 in Flute Lg, 6 in Overall Lg
Yankee Candle These high-speed steel chucking reamers come in sizes that fall between standard trade sizes, and

Yankee - 433-.3185 - Chucking Reamer, High Speed Steel, Bright (Uncoated), Straight, Decimal Inch, 5/16 in

$95.95

20 Jan 2024

US: Neobits_

Yankee - 433-.3185 - Chucking Reamer, High Speed Steel, Bright (Uncoated), Straight, Decimal Inch, 5/16 in
Yankee Candle These high-speed steel chucking reamers come in sizes that fall between standard trade sizes, and

$105.46

27 Sep 2023

US: First Harmonic

This part in 5 request: Show. This information for suppliers only!

2020-10-30

2020-08-10

2020-08-10

2020-04-18

2019-03-06

Number on catalog scheme: 5

Caterpillar 4333185 Parts scheme TAMPER GP-SCREED

For full view, you need register

Compatible equipment models: 4333185:

ASPHALT SCREED AS4173 Caterpillar

Information:

Removal Procedure
Start By:
Raise the hood. Refer to Operation and Maintenance Manual, "Hood Control".
Turn the battery disconnect switch to the OFF position. Refer to Operation and Maintenance Manual, "Battery Disconnect Switch".
At operating temperature, the hydraulic tank is hot and under pressure.Hot oil and components can cause personal injury. Do not allow hot oil or components to contact skin.Remove the filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand. Remove the filler cap slowly in order to relieve pressure.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Put identification marks on all lines, on all hoses, on all tubes and on all wires for installation purposes. Plug all lines, all hoses and all tubes. This helps prevent fluid loss and contamination of the oil system.
Illustration 1 g00762413
Remove protective cap (1) for the auxiliary starting receptacle. Remove two bolts (2) and two washers (3) in order to remove step (4).
Illustration 2 g00789071
Remove seven bolts (5) and seven washers (6) in order to remove hydraulic tank cover (7).
Illustration 3 g00762719
Remove bolt (8), the washer, and two clips (9). Remove five bolts (10) and five washers (11). Lay bracket (12) aside.
Illustration 4 g00762720
Remove nut (13) in order to disconnect ground cable (14). Pull back terminal boot (15) and remove nut (16) in order to disconnect positive cable (17).
Illustration 5 g00762721
Loosen two retaining nuts (18) and remove tube (19).
Illustration 6 g00762722
Loosen retaining nut (20) and disconnect hose (21). Loosen retaining nut (22) and disconnect hose (23).
Illustration 7 g00762723
Remove four bolts (24) and four washers (25). With the aid of a second person, remove secondary steering pump and electric motor (26). The weight of the secondary steering pump and electric motor (26) is 25 kg (55 lb).
Remove four bolts (27), four nuts (28) and the washers in order to separate secondary steering pump and electric motor (26) from plate (29). .