TANDEM & COVER GP 2850596 - Caterpillar

Refer to Operation and Maintenance Manual, "Seat Belt" for more information.Relieve Tank Pressure (3)This safety message is located near the bottom of the hydraulic tank inside the left access door.
g01409728
At operating temperature, the hydraulic tank is hot and under pressure.Hot oil and components can cause personal injury. Do not allow hot oil or components to contact skin.Remove the filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand. Remove the filler cap slowly to relieve pressure.
Entanglement With Rotating Belt (4)This safety message is located inside the engine compartment on the compressor, if equipped.
g01409729
Entanglement in rotating belt could cause injury or death. Stop belt before performing maintenance on belt.
Refer to Operation and Maintenance Manual, "Belts - Inspect/Check/Adjust" for more information.No Ether in Air Inlet (5)Safety Message (6) is located on the cover of the engine air precleaner.
g01372254
Do not use ether. This machine is equipped with glow plugs. Using ether can create explosions or fires that can cause personal injury or death. Read and follow the engine starting procedure in the Operation and Maintenance Manual.
Hot Coolant Under Pressure (6)This safety message is located on the inside of the radiator access door on the hood of the machine.
g01378799
Pressurized system! Hot coolant can cause serious burns, injury or death. To open the cooling system filler cap, stop the engine and wait until the cooling system components are cool. Loosen the cooling system pressure cap slowly in order to relieve the pressure. Read and understand the Operation and Maintenance Manual before performing any cooling system maintenance.
Refer to Operation and Maintenance Manual, "Cooling System Level - Check" for more information.Improper Connection of the Jump Start Cable (7)This safety message is located on the door of the battery compartment.
g01409730
Improper jumper cable connections may cause an explosion resulting in personal injury. Batteries may be located in separate compartments. When using jumper cables, always connect positive (+) cable to positive (+) terminal of battery connected to starter solenoid and negative (-) cable from external source to starter negative (-) terminal. (If not equipped with starter negative terminal, connect to engine block.) Follow procedure in the Operation and Maintenance Manual.
Refer to Operation and Maintenance Manual, "Engine Starting With Jump Start Cables" for more information.High Pressure Cylinder (8)This safety message is located on the access cover for the track adjuster on both roller frames.
g01372252
Personal injury or death can result from grease under pressure.Grease coming out of the relief valve under pressure can penetrate the body causing injury or death.Do not watch the relief valve to see if grease is escaping. Watch the track or track adjustment cylinder to see if the track is being loosened.Loosen the relief valve one turn only.If track does not loosen, close the relief valve and contact your Caterpillar dealer.
Refer to Operation and Maintenance Manual, "Track - Check/Adjust" for more information.