3J7432 TANDEM PUSHER C-FRAME GROUP Caterpillar parts
D9G
Rating:
Alternative (cross code) number:
CA3J7432
3J-7432
3J7432
CA3J7432
3J-7432
3J7432
Weight: 98 pounds 44 kg.
TRACK-TYPE TRACTOR,
Compatible equipment models: 3J7432:
Number on catalog scheme:
For full view, you need register
Information:
mode is a feature in the software that helps ensure that a dyno run is accurate. Dyno mode should be used whenever a dyno run is performed on the engine. Dyno mode disables certain strategies that could cause the dyno run to be invalid. For example, the cooling fan may be disabled. The following features are disabled by dyno mode:
Idle shutdown
Control of the cooling fan
Fuel temperature power correction
Instructions from the anti-lock brake system (ABS) and traction control system
Certain deratesDyno mode is enabled with the Caterpillar Electronic Technician (ET) prior to a dyno run. The Engine Control Module (ECM) contains an internal timer that allows Dyno Mode to be active for 30 minutes. After 30 minutes, Dyno Mode must be restarted. The following events cause Dyno Mode to exit:
The key switch is cycled.
The ECM loses communication with Cat ET.
Idle shutdown
Control of the cooling fan
Fuel temperature power correction
Instructions from the anti-lock brake system (ABS) and traction control system
Certain deratesDyno mode is enabled with the Caterpillar Electronic Technician (ET) prior to a dyno run. The Engine Control Module (ECM) contains an internal timer that allows Dyno Mode to be active for 30 minutes. After 30 minutes, Dyno Mode must be restarted. The following events cause Dyno Mode to exit:
The key switch is cycled.
The ECM loses communication with Cat ET.
Caterpillar SIS machinery equipment:
Parts tandem Caterpillar catalog:
8W9293
TANDEM & COVER GP
120H, 120H ES, 120H NA
120H, 120H ES, 120H NA