TANK AS 1238670 - Caterpillar

Illustration 1 g03320053
Table 1
Specification for 296-3251 Stick Cylinder Gp    
Item     Qty     Part     Specification Description    
1     1     105-7366 Bushing     Bore before assembly is
70.23 0.02 mm (2.765 0.001 inch).    
Installation depth is
7.5 0.3 mm (0.30 0.01 inch).
2     1     106-6872 Bushing     Bore before assembly is
70.23 0.02 mm (2.765 0.001 inch).    
Installation depth is
7.3 0.3 mm (0.29 0.01 inch).
3     8     095-9806 Bolt     Torque to
340 40 N m (251 30 lb ft).    
A     1     198-7217 Cylinder As     Bore diameter is
110.06 0.04 mm (4.333 0.002 inch).    
B     1     296-3273 Cylinder Rod and Bearing As     Diameter is
74.93 0.03 mm (2.910 0.001 inch).    
C     1     158-6380 Head     Bore over two lands is
75.53 0.03 mm (2.974 0.001 inch).    
4     1     143-8150 Special Locknut     Torque to
4000 200 N m (2950 148 lb ft).    
Before assembly, lubricate the face and threads with 309-6932 Hydraulic Oil.
5     1     147-5819 Ring     Lubricate the inside diameter and the outside diameter with clean grease.    
6     1     9X-7301 Seal As     Lubricate the inside diameter and the outside diameter with clean grease.    
7     1     143-8034 Ring     Lubricate the inside diameter and the outside diameter with clean grease.    
8     1     143-8031 Ring     Lubricate the inside diameter and the outside diameter with clean grease.    
9     1     185-9051 Seal Ring     Slit of ring must turn in direction of piston.    
10     1     114-0750 Bushing     Outer diameter is
80.128 0.033 mm (3.1546 0.0013 inch).    
Thickness is
2.470 0.025 mm (0.0972 0.0010 inch).
11     1     170-9842 Buffer Seal     Lubricate lightly with lubricant that is being sealed.    
12     1     170-9858 U-Cup Seal     Lubricate lightly with lubricant that is being sealed.    
13     1     165-9284 Lip Type Seal     Lubricate lightly with lubricant that is being sealed.    
Before assembly, apply green loctite 609 or loctite 601 to the wiper seal groove.
14     1     103-8443 Stop     After assembly stop must have
0.50 0.26 mm (0.020 0.010 inch) free lineal movement.    
15     2     8T-4241 Retaining Ring     After assembly outer diameter must be
53.3 mm (2.10 inch).