TANK GP-RADIATOR TOP 1258914 - Caterpillar

Parking/Secondary Brake
Do not engage the parking/secondary brake while the machine is moving unless an emergency exists. The use of the parking/secondary as a service brake in regular operation will cause severe damage to the parking/secondary brake system.
Parking/Secondary Brake - The parking/secondary brake is located on the steering column.
Parking/Secondary Brake Engaged - Pull up on the knob to engage the parking/secondary brake.
Parking/Secondary Brake Disengaged - Push down on the knob to release the parking/secondary brake.Brake Pedals
Left Brake Pedal - The left brake pedal disengages the transmission and brakes the machine. This permits higher engine speed for better hydraulic response.
Depress the left brake pedal when positioning and raising the bucket at the same time.
Release the pedal to re-engage the transmission and to release the brake. Right Brake Pedal - The right brake pedal slows down the machine ground speed for normal braking.
Depress the right brake pedal for normal machine braking.
Release the pedal to release the brake.Accelerator Pedal
Accelerator Pedal - The accelerator pedal is located on the floor of the operator's station, at the right.
Push down the pedal to increase travel speed.
Release the pedal to decrease travel speed.Transmission Direction and Speed Control
Direction Selector
Forward (1) - Push the transmission lever forward. The machine will move forward.
Neutral (2) - The machine should not move when transmission lever is in neutral.
Reverse (3) - Pull the transmission lever toward the operator. The machine will move in reverse.Speed Selector
Rotate the transmission control lever to the desired gear speed: 1 -First Speed2 -Second Speed3 -Third Speed4 -Fourth SpeedTransmission Neutral Lock
Locked (pushed in) - The transmission control lever is locked in NEUTRAL.
Unlocked (pulled out) - The transmission control lever is unlocked from neutral and can be moved to the FORWARD or REVERSE position.Steering Wheel
The directional steering, of the machine, is controlled by the steering wheel. The direction the steering wheel is turned, is the direction that the machine will turn. The steering frame lock link must be removed and secured in the stored position to steer the machine.
Left Turn - Move the steering wheel in a counterclockwise direction to steer the machine, to the left. The further the steering wheel is turned in a counterclockwise direction the sharper the left turn.
Right Turn - Move the steering wheel in a clockwise direction to steer the machine, to the right. The further the steering wheel is turned in a clockwise direction the sharper the right turn.Steering Column Tilting
The adjust the steering column, pull up on the latch and move the steering column to the desired position. Release the latch and the steering column will remain in the position it is in.