TANK GP-RADIATOR TOP 1395347 - Caterpillar

Illustration 1 g00303463
Before you load the machine, chock the trailer wheels or the rail car wheels, as shown.
Rotate the antenna to the down position.
Move the machine into position.
Apply the parking brake for the machine.
Turn the engine start switch key to the OFF position. Remove the key.
Illustration 2 g00997954
Install the steering frame lock pin. The pin will hold the front frame and the rear frame rigid. Refer to the Operation and Maintenance Manual, "Steering Frame Lock" for further information.
Block the machine, and tie down the machine. Refer to the Operation and Maintenance Manual, "Lifting and Tying Down the Machine" for more information.
Lock the doors and the access covers. Attach any vandalism protection. Install the cover on the console. Cover the operator seat. Refer to the Operation and Maintenance Manual, "Leaving The Machine" for further information.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
To protect the cooling systems, mix a solution of antifreeze and water. The solution should provide protection to the lowest expected outside temperature. Drain the excess coolant into a suitable container.
Perform a walk-around inspection and measure the fluid levels in the various compartments.